crystal User Manual
Version: 6.6.0/2
323/459
17. Key Panel Control
Module Parameters
Module
Reference name for the panel.
Once named, the alarm status for the panel can be assigned to another function (via the "Panel"
branch of the 'Tree Selection'). The "failed" output is active when the alarm is active.
Select Page x
Reference name for the Page select function.
Select Logic
This input control signal makes Page x active. It can be any control signal but is usually an MF Key
on the same key panel.
Shift
Reference name for the SHIFT select function.
Shift Select Logic
This input control signal makes the SHIFT layer active. It can be any control signal but is usually an
MF Key on the same key panel.
17.3.2
KSC-T20 Key Panel
Some key panels have simpler MF Key lamp color/state parameters, for example:
MF 1
Reference name for the MF Key.
Red
Lights the Red lamp – highest priority.
White
Lights the White lamp.
Yellow
Lights the Yellow lamp.
Green
Lights the Green lamp – lowest priority.
Low
The lamp will be dimmed.
Blink
The lamp will blink.
17.3.3
GPIO & VCA Parameters
Some key panels provide GP inputs and outputs which can be configured in the same way as a
Some key panels provide VCAs which can be configured in the same way as other
