crystal User Manual
Version: 6.6.0/2
68/459
7. Operation
2
.
Make the assignment using either the fader strip controls or VisTool:
Ø
From the fader strip:
·
Turn the rotary control to scroll through the available sources.
·
Once you found the desired source, press
TAKE
to make the assignment - the fader label updates and
the strip assign mode cancels.
·
Alternatively, press
REMV
to remove the source - the fader strip is cleared and strip assign cancels.
Ø
On VisTool:
·
Select an available source (black or blue) to make the assignment - the fader label updates and the
strip assign mode cancels.
·
Alternatively, select
REMOVE
to remove the source - the fader strip is cleared and strip assign
cancels.
·
The
CANCEL
button cancels out of the strip assign mode without making any changes.
3
.
Once an assignment has been made, the console returns to its normal mode of operation:
ACCESS
keys green + DOCK in view.
Ø
Troubleshooting
If you attempt to assign a source but nothing happens, check the following:
·
Is the fader open on the strip you wish to assign? If so, you must close the fader.
·
Is the source already assigned to a different fader strip and the fader open? If so, the source is
deemed to be on-air, and so you must find the source and close its fader.
