crystal User Manual
Version: 6.6.0/2
69/459
7. Operation
7.7
Matrix Pool Sources
For a specially-configured matrix pool source, you can select a signal from a remote matrix using the fader strip
rotary control and
TAKE
button.
7.7.1
Signal Naming & Organization
To support this feature, inputs within the remote matrix must be named using the the following naming
convention: "Group:Signal". When using dynamic input switching, this provides a two-step navigation process:
first select the Group, and then browse through all available Signals within that Group. Both the Group and
Signal labels can be up to 8 characters.
By default, the signal labels are retrieved automatically from the networked router (if using NetCom or Remote
MNOPL protocols).
7.7.2
Selecting a Matrix Pool Signal
Group & Signal Select
Fader Label Display
1
.
Press down on the fader strip rotary control to step through the input parameters until you reach the
signal selection menu.
The display shows either the current Group and Signal name, or the text "
not in pool
".
2
.
Turn the rotary control to scroll through the available signal Groups and press down to make a
selection.
3
.
Turn the rotary control again to scroll through all available Signals with the Group.
4
.
Once you are happy with the selection, press the
Take
button to assign the signal - the fader label
display updates accordingly.
In our example, the three lines of text show the following information:
·
MADI =
the Group name (defined in the remote matrix).
·
In 3
= the Signal name (defined in the remote matrix).
·
Nova17 =
the source Display Name (defined in the configuration).
