LAWO crystal User Manual Download

Page: 169 / 459

crystal User Manual

Version: 6.6.0/2

169/459

10. Audio Mix Engine

10.1.5

Editing Display Names

The

Display

field is used to name the fader label for a source. This is different to the Reference name which

identifies the source within the configuration.

Select the source you wish to edit in the 'Tree Definition' and open the

Parm

tab.

In the

Display

field, enter the name for the source as you want it to appear on the control surface.

Enter six characters or less so that the name can appear in full on the control surface displays.

You can use copy (F5) + paste (F6) or incremental paste (F7) to quickly edit a series of source names.

Summary of Contents for crystal












































































































































































































































































































































































































































































Search results

Summary of Contents for crystal

Reviews:

Related manuals for crystal

Brands by name

Popular brands

LAWO crystal, User Manual

Search results

Summary of Contents for crystal

Reviews:

Related manuals for crystal

Brands by name

Popular brands