crystal User Manual
Version: 6.6.0/2
293/459
16. Connecting a VisTool MK2 PC
16.3
Fader Strip Assignment
The buttons on a
Screen Source Assign
module can be used to perform fader strip assignments from a
VisTool runtime GUI.
The assignment always works on the fader in access, and so you may wish to add some ACCESS keys to the
VisTool page (as described
). The configuration requires two stages: first use the ON-AIR Designer to
prepare the system configuration, and then use VisTool Editor to edit the VisTool project.
ON-Air Designer Configuration
1.
Add a
Screen Src Control
panel to slot 14 of the
2.
Name the panel from its
General
parameters tab:
If the
Swap Colors
option is enabled, then the on-screen "Assign Src" button in VisTool will use more colors to
indicate the fader strip assign status. These are described
.
3.
Select the
Screen Src Control
module from the "Logic" branch of the 'Tree Definition' and assign the
sources you wish to make available for VisTool assignment from the
Src Page
parameter tabs.
You can define up to 192 sources.
