Kyocera TASKalfa 3010i, Operation Manual

Page: 347 / 532

8-15
System Menu > Default Setting on the Machine (System Menu)
Punch Waste Full Error Set what to do when the punch waste box becomes full during printing.
Value
Ignore: Printing continues without punching.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional Finisher (1,000-Sheet Finisher or 3,000-Sheet Finisher) and Hole Punch
Unit.
Paper Mismatch Error Set what to do when the selected paper size or type does not match paper size or type loaded
in the specified paper source while printing from the computer by specifying the cassette or
multi-purpose tray.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Inserted Paper Mismatch Set what to do when it is detected that the cassette paper size setting does not match the
actual paper size that is fed.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Paper Jam before Staple The page from which printing is resumed when a paper jam occurs during a job with stapling
can be selected.
Value
Resume at Top of Page: Resume printing from the first page of the document.
Resume at Jammed Page: Resume printing from the page where the jam occurred.
NOTE
Requires the optional 1,000-Sheet Finisher or 3,000-Sheet Finisher.
Skewed originals When skewed originals while scanning, select whether to print by ignoring the error or display
an error.
Value
Ignore: The error is ignored and the job is printed.
Display Error: Error message to cancel scanning is displayed.
NOTE
This setting is displayed when an optional document processor (dual scan DP) is installed.
Item Description