Kyocera TASKalfa 3010i, Operation Manual

Page: 264 / 532

6-14
Using Various Functions > Functions
Example: B4 and B5
Different Width (Available for metric models only)
The supported combinations of originals are as follows.
• A3, B4, A4, B5
• B4, A4-R, B5
• A4-R, B5-R, Folio
Example: A3, B4, A4, B5
Selecting How to Copy Originals
Set the paper size (copy size) when printing scanned document. Select whether you wish to create individual copies on
different size paper matching the original sizes or to produce all copies on the same size paper.
Mixed Size Copies
Originals are detected individually for size and copied to the same size paper as originals.
Same Size Copies
Originals are all copied to the same size paper.
NOTE
• If you are using the document processor (DP-773), originals of different width cannot be loaded together.
• Up to 30 sheets can be placed in the document processor.
• When mixing the original sizes as using the following combination: A4-R, B5-R, and Folio, make sure to set "Auto Detect
Original Size" to [On] for "Folio". For details, refer to
Auto Detect Original Size on page 8-11 .
IMPORTANT
When placing originals of different width, arrange the originals so that their left sides and top sides are
aligned, and place the originals in alignment with the far width guide. If the originals are not aligned in this
way, they may not be scanned correctly, and skewing or original jams may result.
NOTE
This function is available regardless of whether originals have the same width or not.
A4-R B4 B5 A4-R B4 B5
A4-R B4 B5 B4 B4
B4