Kyocera TASKalfa 3010i, Operation Manual

Page: 129 / 532

3-15
Preparation before Use > Loading Paper
Before Loading Paper
When you open a new package of paper, fan the sheets to separate them slightly prior to loading in the following steps.
1
Bend the whole set of sheets to swell them in the middle.
2
Hold the stack at both ends and stretch it while keeping the entire stack swelled.
3
Raise the right and left hands alternately to create a gap and feed air between the papers.
4
Finally, align the papers on a level, flat table.
If the paper is curled or folded, straighten it before loading. Paper that is curled or folded may
cause a jam.
Avoid exposing opened paper to high temperatures and high humidity as dampness can be
a cause of problems. Seal any remaining paper after loading in the multi purpose tray or
cassettes back in the paper storage bag.
If the machine will not be used for a prolonged period, protect all paper from humidity by
removing it from the cassettes and sealing it in the paper storage bag.
IMPORTANT
If you copy onto used paper (paper already used for printing), do not use paper that is
stapled or clipped together. This may damage the machine or cause poor image
quality.
NOTE
Note that some paper types have a tendency to curl and may jam in the paper eject unit.
If you use special paper such as letterhead, paper with holes or paper with pre-prints like
logo or company name, refer to
Paper on page 11-12 .