Kyocera Ai5555 Instruction Handbook Manual Download Page 59

Page: 59 / 167

3-38 NetWare Configuration

NetWare Configuration

Configure Using NetWare 4.x NetWare Directory Services

Using the Network Management Utility

File

View Go Options Help

Server

NC2-317690 Ver. 1.05 NC-2

NC2-317483 Ver. 1.04 NC-2

Welcome to the Print Server Management Access

Program

For Help, press F1

NUM

This program uses IPX/SPX to communicate with the Print Servers.

To select a unit, click on a Print Server Identification in the drop down Server list.

To get the Print Server name (if different from the default ID), highlight the Print Server Identification and then

select "Show Detail" under the Options menu.

To get the detailed information for all listed Print Servers, select "Show All" under the Options menu. If there are

many Print Servers, this operation may take some time to complete.

Management Access Program - Management Access Program Home Page

The MAP Welcome Screen shown above is for your reference while
configuring NetWare Directory Services. The procedure starts on p. 3-40.

Summary of Contents for Ai5555








































































































































































Search results

Summary of Contents for Ai5555

Reviews:

Related manuals for Ai5555

Brands by name

Popular brands

Kyocera Ai5555, Instruction Handbook Manual

Search results

Summary of Contents for Ai5555

Reviews:

Related manuals for Ai5555

Brands by name

Popular brands