Kyocera Ai5555, Instruction Handbook Manual

Page: 25 / 167

3-4 NetWare Configuration
NetWare Configuration
NetWare Utilities Overview
Basic Steps for Making Changes To NC-2
CHANGE REQUIRED ACTION STEP REQUIRED
Relocate the printing system to the new
location and make hardware connections
explained in Section 2. You do not need
to configure with PCONSOLE.
Perform hardware installation and
software configuration procedures in
Sections 2, 3, 4, 5, and 6.
Use the PCONSOLE utility.
Use the PCONSOLE utility.
Use the PCONSOLE utility. See Print
Queue Functions in this Section.
Use the PCONSOLE utility. See Print
Queue Functions in this Section.
Use the MAP utility that is on our
providing Network Management Utility
diskette.
To move our printing system
to another location on the
same network . . .
To move our printing system
from its current network to a
new network . . .
To attach new file servers to
NC-2 unit . . .
To remove a file server
attached to the NC-2. . .
To add new queues to the
NC-2 unit . . .
To remove queues from the
NC-2 unit . . .
To change the NC-2 print
server name . . .