Kyocera Ai5555 Instruction Handbook Manual Download Page 103

Page: 103 / 167

UNIX Printing Through TCP/IP 5-13

UNIX Printing Through TCP/IP

Windows NT Instructions

Assigning IP Address With ARP

1. From Windows, enter the MS/DOS box. At the command prompt enter:

ping [any valid IP address on your network - not the print server]
The identified unit should reply.

NOTE: You need to ping something on your network prior to using the arp -s command.

Windows NT will not allow you to add an entry to an empty arp cache.

arp -s [IP address of the NC-2 Print Server] [MAC Address of
the NC-2 Print Server]. The entry should be accepted.

ping [IP address of the NC-2 Print Server].
Request should time out.

2. Recycle the power on the printer or let the NC-2 Print Server reset itself.
The NC-2 Print Server will produce a status page that should include the
entered IP address.

3. When the NC-2 Print Server is up again, at the command prompt, enter:

ping [IP address of the NC-2 Print Server]
Continue until you get a reply.

NOTE: This only enters the IP address. Use the ntBOOTP Program or any standard Internet
Web Browser to change the IP parameters.

Summary of Contents for Ai5555








































































































































































Search results

Summary of Contents for Ai5555

Reviews:

Related manuals for Ai5555

Brands by name

Popular brands

Kyocera Ai5555, Instruction Handbook Manual

Search results

Summary of Contents for Ai5555

Reviews:

Related manuals for Ai5555

Brands by name

Popular brands