manualshive.com logo in svg

Kyocera Ai5555, Instruction Handbook Manual, Page: 48 / 167

Share
Download
Kyocera Ai5555 Instruction Handbook Manual Download Page 48

NetWare Configuration 3-27

NetWare Configuration

Configure Using NetWare 2.15 and 3.1x

Using PCONSOLE

Configure the NC-2 Print Server

4. Select the newly created NC-2 Novell Print Server (or a Print Server you
wish to configure) from the Print Servers box, then press Enter.

5. Select Print Server Configuration, then press Enter to display the Printer
Server Configuration menu.

6. Select Printer Configuration from the Print Server Configuration
Menu, then press Enter. The Configured Printers menu displays.

Assign the NC-2 printer to Printer 0
in PCONSOLE.

7. Select "Not Installed [0]", then press Enter to
display the Printer  0  configuration screen
shown below.

8. Select "Name:
Printer 0", then press
Enter. Backspace to
erase that default
printer name and assign
a descriptive name for
the printer, such as
PCU-1, then press Enter.

9. Select "Type: Defined elsewhere"
then press Enter to display the next screen (see next page).

NC2_000009
NC2_000008
NC2_000007
NC2_000006
NC2_000005
NC2_000004
NC2_000003
NC2_000002

0

Printer 0

Not Installed

0

Wednesday September 30, 1998

Summary of Contents for Ai5555








































































































































































Reviews:

No comments