3-54 NetWare Configuration
NetWare Configuration
Configure Using NetWare 4.x Bindery Emulation
Using
PCONSOLE
Enter Printer Type Name
7. Tab down to the Printer type field, and press Enter.
8. When the pop-up window appears, select the Other/Unknown option.
9. Press Enter to select your choice. With all your choices now selected,
press the [F10] (Save) key to save your configuration.
Follow the previous steps to configure all the servers connected to NC-2
units on the network.
Add to Print Server and Queue Lists
10. If you need to view, add, delete or modify print servers or print queues
after your initial setup, select either Print Queues or Print Servers from the
Available Options screen. Either selection will call up information screens
from which you can view or modify more choices.
• On the Print Queues Information screen you can select from Print Jobs,
Status, Attached Print Servers, Information, Users, Operators, and Print
Server choices.
• On the Print Server Information screen, you can select from Printers,
Information and Status, Users, Operators, Description, Password and Audit
items.
In about 15 seconds, the network software initializes, and you are ready to
print. If the green LED does not go on at any time, try plugging the power
cord into another wall outlet. If it still does not power on, contact the
authorized dealer.
Summary of Contents for Ai5555
