Kyocera Ai5555, Instruction Handbook Manual

Page: 86 / 167

AppleTalk Configuration & Administration Program 4-5
AppleTalk Configuration & Administration Program
Configuring the NC-2 Print Server
Use the options added to the menu bar to configure the print server. De-
pending on your printer, certain functions may appear grayed out, which
indicates that they cannot be selected.
q
Use Printer Setup to configure your NC-2 for PostScript
printers.
q
Use Reset to perform a full reset of the NC-2 unit.
When you select Reset from the NC-2 menu, the NC-2 resets
automatically.
q
Use Configuration to change the NC-2 device name, and the
AppleTalk Zone name; and also view the NC-2 configuration
features. You can change the NC-2 default name to another one
you may prefer. Be sure to recycle the power to the NC-2 Off,
then On; otherwise, the changes you made will not occur.
When you choose Configuration the following screen appears:
1. To change the print server device name, click on the name displayed, then
enter the new name.
2. To change the AppleTalk Zone, click on the zone displayed. A menu
displays all available zones.
3. Select the new zone from the menu.
4. Click on OK when you have finished viewing this screen or when you are
done making changes.
5. Turn off the printer and then turn it on again to make the changes take
effect. The status sheet should identify the new printer name and the new
zone preference.
Configuration
Device Type: NC-2
Serial Number: 123456
Name: NC-2
AppleTalk Zone: Engineering