Kyocera Ai5555 Instruction Handbook Manual Download Page 124

Page: 124 / 167

5-34 UNIX Printing Through TCP/IP

UNIX Printing Through TCP/IP

Installing TCP/IP If Not Running lpd

The TCP/IP diskette provided with the NC-2 Print Server includes install
scripts for various UNIX systems.

This section describes how to install TCP/IP printing on the NC-2 Print
Server for any of the following operating systems:

•

DEC ULTRIX 4.3 RISC

•

System V Rel. 4

•

Solaris (Ver. 1.x, 2.x)

•

SCO UNIX

•

OSF1/ALPHA

•

IBM AIX

•

HP/UX

Once the NC-2 Print Server has its IP information loaded, the following
steps are necessary for host-side TCP/IP printing:

1. Load the print server software on your workstation.
It is presented as a

tar

file on the TCP/IP diskette.

2. Run the appropriate installation script, if available.

3. Complete the configuration for your operating system.

Summary of Contents for Ai5555








































































































































































Search results

Summary of Contents for Ai5555

Reviews:

Related manuals for Ai5555

Brands by name

Popular brands

Kyocera Ai5555, Instruction Handbook Manual

Search results

Summary of Contents for Ai5555

Reviews:

Related manuals for Ai5555

Brands by name

Popular brands