Kyocera Ai5555, Instruction Handbook Manual

Page: 90 / 167

AppleTalk Configuration & Administration Program 4-9
AppleTalk Configuration & Administration Program
How To Access The HTTP Server With An IP Browser
Access to the HTTP Server allows you to perform all print server functions.
Use the following procedure to access HTTP (HyperText Transfer Protocol)
with your favorite IP Browser, such as Netscape or Microsoft Internet
Explorer.
1. Assign an IP address to the NC-2.
(See TCP/IP Users on the previous page.
2. Start the IP Browser you normally use.
When the Browser is up and running, type http:// followed by the IP
address of the unit in the Location field at the top of the Browser screen, or
by going to File at the menu bar and choosing Open Location.
Example: For a unit with an IP address of 199.9.200.200, type:
http://199.9.200.200
Control Options
When you have no access to Novell NetWare, Control Options can be used
to enable or disable the display of the Power-on Status Page.
q
When enabled, the Power-on Status Page prints after your
NC-2-attached printer is turned on. The default is the ON
(enable) position.
q
When you choose Options from the NC-2 menu, the following
Control Options screen appears:
Control Options
Status Sheets:
•
Enable Powerup Display
O Disable Display