Kyocera Ai5555, Instruction Handbook Manual

Page: 40 / 167

NetWare Configuration 3-19
NetWare Configuration
Using the Network Management Utility
Using Help Screens
Protocols
Setup NetWare (continued)
Disable Bindery
Click on this box to enable or disable Bindery Services for Novell NetWare
4.x and above. Bindery is disabled when the check box is marked. When
you disable Bindery, the print server will not support any of the print servers
on the Bindery file server.
Enable Ports
When the check box is marked for any of the ports, then the port and the
printer attached to it are enabled for printing. When the check box is empty,
then printing is disabled and you cannot print to that printer.
If you have not entered a password already, you will need to enter one now
in order to make any entries or changes to this screen. The factory default
password is "sysadm." Enter the password in lowercase.
Click on [Accept Settings] when you are finished making your entries. This
puts your new entries into effect. Click on [Clear Inputs] to clear the entries
you made or to revert to the previous settings.
Setup Banyan VINES
This screen lets you enter a login name and password for the print server, as
well as service names for each print server port. During initial installations,
you must do this IMMEDIATELY after the hardware installation, because
the login name, password and service names must be downloaded to the
print server before it can be used. This screen can also be used to change
and of the names or passwords. Each field is described below.
Enable VINES
When this check box is marked, the print server is enabled for the Banyan
VINES protocol. If the check box is not marked, then the print server is not
enabled for the protocol. To enable the protocol, click on the check box. An
X will appear in the box, indicating the enabled protocol.