Kyocera Ai5555 Instruction Handbook Manual Download Page 31 | Manualshive

Page: 31 / 167

background image

3-10 NetWare Configuration

NetWare Configuration

Using the Network Management Utility

Using Help Screens

System Functions

System Functions allow you to reset the unit when an error condition
occurs; reset the unit to download a new version of the print server soft-
ware; return the unit to its factory defaults before configuring; check the
unit status on Novell NetWare, Banyan VINES, TCP/IP, or AppleTalk
protocols; update the Ethernet network; change the password assigned to
the unit.

Reset

Two functions are available: Reset Unit lets you reset the print server to
clear an error condition that is preventing you from printing. Reset simply
recycles the unit and leaves all current print server settings intact. Typical
error conditions that would require resetting the unit include the situation
where the printer port does not accept data for a print job, or the printer is
printing codes instead of the desired text. When you reset the unit, you may
need to recycle the printer power Off, then On again to correct the problem.

Reset the Unit for Download lets you reset the print server in to download
mode to enable you to update the unit's flash read-only memory (ROM)
with a new or updated software release. A software release normally
includes new features or fixes for the print server.

Factory Defaults

This function resets the print server to the factory default settings that came
with the unit. This feature is useful in the event you are moving the print
server to a new location, or if the unit was set up improperly and you need
to start over again. Remember that this option clears any settings already
defined for the print server.

Unit Status
The Unit Status screen displays the current state for each protocol and print
server port available on your print server model. For each supported
protocol (Novell NetWare, Banyan VINES, TCP/IP, AppleTalk), the top line
displays the protocols supported and indicates whether the protocol is
currently enabled or disabled.

«
...
29
30
31
32
33
...
»

Summary of Contents for Ai5555








































































































































































Reviews:

No comments

Related manuals for Ai5555

Brand: CAME Pages: 12

Brand: CAME Pages: 16

Brand: Ultrak Pages: 41

Brand: Zander Aachen Pages: 10

Brand: Kasco Pages: 3

Brand: C Prox Ltd Pages: 5

Brand: Paradox Pages: 2

Brand: Gardigo Pages: 6

Brand: VAT Pages: 14

Brand: GADGETMONSTER Pages: 30

Home easy HE-440

Brand: CH Byron Pages: 2

Brand: RTI Pages: 2

TrueAlarm 4100 Series

Brand: Simplex Pages: 8

Brand: BABYTREND Pages: 24

Brand: Qianjin Electronic Pages: 39

MSI-EM-IO84NP Series

Brand: Leuze electronic Pages: 22

Brand: Grundfos Pages: 23

Brand: Danfoss Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands