SERVICE MANUAL
2-24
9G9002 – 2011-08-15
Densitometer Assembly
Removal
[1]
Open the heat shield, and then remove the felt pad assembly (see
“Felt Pad Assembly”
).
[2]
Disconnect the connector on the top of the cooling assembly.
[3]
Disconnect the connector on the bottom of the cooling assembly from the main wiring harness.
Prerequisites:
• Close the film cartridge. (Touch the Pause button on the display screen.)
• De-energize the laser imager.
• Disconnect the power cord.
• Remove:
–
Top cover
–
Right cover
–
Left cover
H221_6033GC
Connector, top
Cooling Assembly
Lower Screw
Cooling Assembly
Lower Screw
Cooling Assembly Brackets
Connector, bottom
Cooling Assembly
