SERVICE MANUAL
2-32
9G9002 – 2011-08-15
Vacuum Pump
Removal
[1]
Remove the:
(a)
Screw from the clamp
(b)
Loop clamp from the vacuum pump
Important
When disconnecting the tubing, leave the tie wrap in place.
[2]
Disconnect the:
(a)
Connector
(b)
Tubing
Installation
[1]
Connect the:
(a)
Tubing
(b)
Connector
[2]
Place the loop clamp around the vacuum pump.
[3]
Insert the screw through the ends of the loop clamp.
[4]
Install the screw with clamp and pump onto the frame.
Prerequisites:
• Close the film cartridge. (Touch the Pause button on the display screen.)
• De-energize the laser imager.
• Disconnect the power cord.
•
Remove the back cover
.
Tools:
T20 Torx driver
Screw
Clamp
Vacuum Pump
Connector
Tubing connections
