SERVICE MANUAL
4-58
9G9002 – 2011-08-15
Condition Code: 25-922 – RF Tag Micro Diagnostics Failure
Condition Code: 26-323 – Jam During Film De-skew
Web Portal Message
Log Message
DICOM Printer
StatusInfo
Severity
RF Tag: Internal
Diagnostic Failure
RF Tag reader failed
self diagnostics
BAD SUPPLY MGZ
0-Fatal
Description
When the RF Tag reader is told to perform diagnostics and returns a
diagnostics failure, the MCS commands a retry. This error occurs if the
microcontroller still indicates a diagnostics failure after 3 attempts.
The error clears only when power is cycled.
System Impact
The imager can only print jobs that were in process when the error occurred.
The spooler can still accept jobs, but the jobs will not print until the error is
resolved. All jobs that were in process when the error occurred will reprint
completely when the error is resolved. [SI-1]
User Action
1. Shut down the laser imager, and then restart the laser imager.
2. If the error persists, call for service.
Show at DS
True
DICOM Printer
Status
WARNING
Unique Symb. ID
ERR_RFTAG_DIAG_FAIL
Web Portal Message
Log Message
DICOM Printer
StatusInfo
Severity
Film Jam in Area 2
Sensor (S6) detected
initial film leading edge,
but did not detect
edges again during or
after de-skew
FILM JAM
1-Alert
Description
This error occurs if the leading edge of the film is detected at the SOP (start-of-
page) sensor (S6) as film is fed, and then is not detected leaving and re-
entering the SOP sensor as the film de-skews (moves backward and then
forward).
The error clears when the film cartridge is removed and re-inserted or when the
top cover is removed and then installed.
System Impact
The imager can only print jobs that were in process when the error occurred.
The spooler can still accept jobs, but the jobs will not print until the error is
resolved. All jobs that were in process when the error occurred will reprint
completely when the error is resolved. [SI-1]
User Action
Clear the jam (see
“Film Jam in Area 2 – Error Codes 323, 324 or 325 (Web
Portal code 26323, 26324 or 26325)”
).
Show at DS
True
DICOM Printer
Status
WARNING
Unique Symb. ID
ERR_ENTERING_EXPOSURE_JAM
Logged for RMS
[CartridgeInfo=bbeeee-cjj-d-iii][FilmSize=size]
