manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Driving your vehicle

36

4

Manual climate control system

To defog inside windshield  

1. Select any fan speed.
2. Select desired temperature.
3. Select 

the or position.

4. The outside (fresh) air and air condi-

tioning will be selected.

To reduce the probability of fogging up
the inside of the windshield, the air intake
control is set to the outside (fresh) air
position automatically and the air condi-
tioning will automatically operate if the
mode is selected to the 

or 

posi-

tion. If you don't want the air conditioning
and the outside (fresh) air position, press
the corresponding button to cancel the
operation.

To defrost outside windshield  

1. Set the fan speed to the “3” or “4” posi-

tion.

2. Set the temperature to the extreme hot

position.

3. Select the 

position.

4. The outside (fresh) air and air condi-

tioning will be selected.

To reduce the probability of fogging up
the inside of the windshield, the air intake
control is set to the outside (fresh) air
position automatically and the air condi-
tioning will automatically operate if the
mode is selected to the 

or 

posi-

tion. If you don't want the air conditioning
and the outside (fresh) air position, press
the corresponding button to cancel the
operation.

• For maximum defrosting, set the temper-

ature control to the extreme right/hot posi-
tion and the fan speed control to the high-
est speed.

• If warm air to the floor is desired while

defrosting or defogging, set the mode to
the floor-defrost position.

• Before driving, clear all snow and ice from

the windshield, rear window, outside rear
view mirrors, and all side windows.

• Clear all snow and ice from the hood and

air inlet in the cowl grill to improve heater
and defroster efficiency and to reduce the
probability of fogging up inside of the
windshield.

WINDSHIELD DEFROSTING AND DEFOGGING  

1JBN4050

1JBN4051

CAUTION

Do not use the 

or 

position

during cooling operation in
extremely humid weather. The dif-
ference between the temperature of
the outside air and that of the wind-
shield could cause the outer sur-
face of the windshield to fog up,
causing loss of visibility. In this
case, set the mode selection knob
to the 

position and fan speed

control knob to the lower speed.

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Mercedes-Benz R-Class Owner'S Manual preview
R-Class
Brand: Mercedes-Benz Pages: 373
Globalsat MR-350P Installation Manual preview
MR-350P
Brand: Globalsat Pages: 2
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
Cadillac 1999 DeVille Owner'S Manual preview
1999 DeVille
Brand: Cadillac Pages: 368
Luverne 205760 Installation Instructions preview
205760
Brand: Luverne Pages: 3
Navman B2+ User Manual preview
B2+
Brand: Navman Pages: 27
M7 SPEED AGS-R2 Manual preview
AGS-R2
Brand: M7 SPEED Pages: 6
KEKO K162 Installation Instructions Manual preview
K162
Brand: KEKO Pages: 13
Road Armor Stealth 4191F Series Install Instructions preview
Stealth 4191F Series
Brand: Road Armor Pages: 5
Gator GRM430EM User Manual preview
GRM430EM
Brand: Gator Pages: 6
Black+Decker BXAE00011 Operating Instructions Manual preview
BXAE00011
Brand: Black+Decker Pages: 21
Beeper RW050RF User& Installer'S Manual preview
RW050RF
Brand: Beeper Pages: 20
Brink 4698 Fitting Instructions Manual preview
4698
Brand: Brink Pages: 26
TATA Motors Indigo LE Owner'S Manual & Service Book preview
Indigo LE
Brand: TATA Motors Pages: 151
Thule QUICKDRAW RACHET TIE-DOWNS 855 User Manual preview
QUICKDRAW RACHET TIE-DOWNS 855
Brand: Thule Pages: 3
Westin 32-1660 Instructions preview
32-1660
Brand: Westin Pages: 3
Rola RCLSH Fitting Instructions preview
RCLSH
Brand: Rola Pages: 2

Brands by name

Popular brands

Load more brands