manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Knowing your vehicle

4

3

Operational distance may vary depend-
ing upon the area the transmitter is used
in. For example, if the vehicle is parked
near police stations, government and
public offices, broadcasting stations, mil-
itary installations, airports, or transmit-
ting towers, etc., these may interfere with
the signal.

This device complies  with Part 15 of
the FCC rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful

interference, and 

2. This device must accept any interfer-

ence received, including interference
that may cause undesired operation.

Battery replacement

Transmitter uses a 3 volt lithium battery
which will normally last for several years.
When replacement is necessary, use the
following procedure.
1. Insert a slim tool into the slot and gen-

tly pry open the transmitter center
cover (1).

2. Replace the battery with new one.

When replacing the battery, make sure
the battery positive “+” symbol faces
up as indicated in the illustration.

3. Install the battery in the reverse order

of removal.

✽

✽

NOTICE

The keyless entry system transmitter is
designed to give you years of trouble-
free use, however it can malfunction if
exposed to moisture or static electricity.
If you are unsure how to use your trans-
mitter or replace the battery, contact an
authorized Kia dealer. 

For replacement transmitters, see an
Authorized Kia Dealer for reprogram-
ming.

✽

✽

NOTICE

• Using the wrong battery can cause the

transmitter to malfunction. Be sure to
use the correct battery.

• To avoid damaging the transmitter,

don't drop it, get it wet, or expose it to
heat or sunlight. 

WARNING

Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.

1KMA2003

1

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Eclipse AVN 2210p mkII Operation Manual preview
AVN 2210p mkII
Brand: Eclipse Pages: 6
iDataLink maestro Rr Install Manual preview
maestro Rr
Brand: iDataLink Pages: 106
JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
Barker 25895 Owner'S Instructions preview
25895
Brand: Barker Pages: 2
Saleen 10-8002-C11998B Installation Manual preview
10-8002-C11998B
Brand: Saleen Pages: 12
Buick 2013 Buick Verano Manual preview
2013 Buick Verano
Brand: Buick Pages: 5
TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
ECS Electronics CR-066-BHU Manual preview
CR-066-BHU
Brand: ECS Electronics Pages: 16
Safe Fleet PRIME DESIGN VRR-NV200 Manual preview
PRIME DESIGN VRR-NV200
Brand: Safe Fleet Pages: 12
TBC 645624 Instruction Manual preview
645624
Brand: TBC Pages: 12
Prorack K194 Fitting Instructions For Basic Carrier preview
K194
Brand: Prorack Pages: 14
Harman Kardon DP 2US Quick Start Manual preview
DP 2US
Brand: Harman Kardon Pages: 16
TATA Motors TIAGO XZ 2019 Owner'S Manual preview
TIAGO XZ 2019
Brand: TATA Motors Pages: 184
B&G electronics PW-50C Civilian Installation And Operation Manual preview
PW-50C Civilian
Brand: B&G electronics Pages: 7
Jeep Cherokee 1977 Owner'S Manual preview
Cherokee 1977
Brand: Jeep Pages: 136
Quadratec 12057.0263 Installation Manual preview
12057.0263
Brand: Quadratec Pages: 12
Hyundai Entourage 2008 Quick Reference Manual preview
Entourage 2008
Brand: Hyundai Pages: 11
Saturn 2007 Ion Owner'S Manual preview
2007 Ion
Brand: Saturn Pages: 440

Brands by name

Popular brands

Load more brands