manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

10 7

Index

Seat, Split Folding····················································· 3-19

Rearview Mirrors

Day/Night ·································································· 3-73
Outside ······································································ 3-71

Recharging, Battery ······················································ 7-25
Recliner, 

Adjusting Seatback (Front Seat) ······························· 3-17

Recommended

Lubricants·································································· 7-45
SAE Viscosity Number ············································· 7-45

Registering Your Vehicle in a Foreign Country ············· 9-3
Reminder Warning Chime, Key ··································· 4-22
Remote Keyless Entry ···················································· 3-3
Reporting Safety Defects················································ 9-5
Restraint

Of Infants and Small Children ·································· 3-35
Of Large Children ····················································· 3-36
Of Pregnant Women ·················································· 3-35
System, Child ···························································· 3-37
System, Safety Belt ··················································· 3-26

Road Warning ································································· 6-2
Roadside Assistance, Emergency ··································· 9-2
Rocking the Vehicle························································ 5-6
Rotation, Tire ································································ 7-28

Safety Belt ···································································· 3-24

Into the auto lock mode············································· 3-39
Into the Auto Lock mode, placing a passenger········· 3-39
Restraint System························································ 3-26

System, Proper Use and Care of ······························· 3-35
Warning Light and Chime········································· 3-28

Safety belt warning······················································· 4-20
Safety Chains ································································ 5-16
Schedule 1- Normal Maintenance ·································· 7-3
Schedule 2- Service Maintenance ·································· 7-6
Scheduled Maintenance Service····································· 7-2
Seat·················································································3-15

Adjustment, Front ····················································· 3-16
Rear ··········································································· 3-19

Severe Maintenance, Schedule 2···································· 7-6
Snow Tires ······································································ 5-8
Spare Tire

Imortant-Use of Compact·········································· 6-18
Removing the ···························································· 6-17

Special Driving Conditions ············································ 5-6
Specifications·································································· 8-2

Lubricant ··································································· 7-45

Speedometer ································································· 4-17
Starting

Emergency··································································· 6-3
Jump ············································································ 6-3
The Engine ·································································· 4-3

Steering

Column Lock, Ignition Switch and Anti-Theft ··········· 4-2
Power ······························································· 4-14, 7-16
Tilt ············································································· 4-14
Wheel ······························································· 4-14, 7-16

Storage Compartment ··················································· 3-75
Suggestions for Economical Operation ·························· 5-5
Sunglass Holder ···························································· 3-76

S

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
Dakota Digital VHX-37F Installation preview
VHX-37F
Brand: Dakota Digital Pages: 2
Dakota Digital BIM-01-2 Manual preview
BIM-01-2
Brand: Dakota Digital Pages: 7
Jeep Wrangler 2011 Owner'S Manual preview
Wrangler 2011
Brand: Jeep Pages: 603
Jeep Patriot 2011 User Manual preview
Patriot 2011
Brand: Jeep Pages: 80
Thule 1306 RAPID SYSTEM Fitting Instructions Manual preview
1306 RAPID SYSTEM
Brand: Thule Pages: 8
Whispbar K925W Fitting Instructions Manual preview
K925W
Brand: Whispbar Pages: 15
Yakima StickUp Installation Instructions Manual preview
StickUp
Brand: Yakima Pages: 21
Harbor Freight Tools 66242 User Manual preview
66242
Brand: Harbor Freight Tools Pages: 12
Honda 0SR95-HL4-211A Installation Instructions preview
0SR95-HL4-211A
Brand: Honda Pages: 3
TBC 645624 Instruction Manual preview
645624
Brand: TBC Pages: 12
Prorack K194 Fitting Instructions For Basic Carrier preview
K194
Brand: Prorack Pages: 14
Safe Fleet inView 360 Fusion Calibration Manual preview
inView 360 Fusion
Brand: Safe Fleet Pages: 27
Seat ROADSIDE ASSISTANCE Handbook preview
ROADSIDE ASSISTANCE
Brand: Seat Pages: 44
Volvo 164 1969 Service Manual preview
164 1969
Brand: Volvo Pages: 266
GAC MOTOR EMPOW Manual preview
EMPOW
Brand: GAC MOTOR Pages: 356
JKS JKSOGS960 Installation Instructions Manual preview
JKSOGS960
Brand: JKS Pages: 6
Oldsmobile 1998 Aurora Owner'S Manual preview
1998 Aurora
Brand: Oldsmobile Pages: 380

Brands by name

Popular brands

Load more brands