manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

4 27

Driving your vehicle

Windshield washers  

In the OFF position, pull the lever gently
toward you to spray washer fluid on the
windshield and to run the wipers 2-3
cycles.
Use this function when the windshield is
dirty.
The spray and wiper operation will con-
tinue until you release the lever.

If the washer does not work, check the
washer fluid level. If the fluid level is not
sufficient, you will need to add  appropri-
ate non-abrasive windshield washer fluid
to the washer reservoir.
The reservoir filler neck is located in the
front of the engine compartment on the
passenger side.

✽

✽

NOTICE

To prevent possible damage to the wash-
er pump, do not operate the washer
when the fluid reservoir is empty. 

Rear window wiper and washer
switch (if equipped)

The rear window wiper and washer
switch is located at the end of the  wiper
and washer switch lever. Turn the switch
to desired  position to operate the rear
wiper and washer.

- Spraying washer fluid and wiping

ON - Normal wiper operation

OFF - Wiper is not in operation

7JBN4021

WARNING

Do not use the washer in freezing
temperatures without first warming
the windshield with the defrosters;
the washer solution could freeze on
contact with the windshield and
obscure your vision.

7JBN4056

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Bimmer Jakes FRONT HEADLIGHT LENS COVER Replacement Manual preview
FRONT HEADLIGHT LENS COVER
Brand: Bimmer Jakes Pages: 4
Conrad 75 16 30 Operating Instructions Manual preview
75 16 30
Brand: Conrad Pages: 26
Ford 2003 Thunderbird Owner'S Manual preview
2003 Thunderbird
Brand: Ford Pages: 200
Gator GX5HDKT User Manual preview
GX5HDKT
Brand: Gator Pages: 8
Renault Lodgy 2017 Driver'S Handbook Manual preview
Lodgy 2017
Brand: Renault Pages: 238
RAM Ram Dodge 2010 Owner'S Manual preview
Ram Dodge 2010
Brand: RAM Pages: 616
Nav TV AUDI-P60H Install Manual preview
AUDI-P60H
Brand: Nav TV Pages: 9
Honda Clarity 2018 Owner'S Manual preview
Clarity 2018
Brand: Honda Pages: 81
WABCO Truck Training Model Operating Instructions Manual preview
Truck Training Model
Brand: WABCO Pages: 56
DFI VC230-BT Installation Manual preview
VC230-BT
Brand: DFI Pages: 6
ECS FIA-030-B Fitting Instructions preview
FIA-030-B
Brand: ECS Pages: 4
Whispbar WB751 Manual preview
WB751
Brand: Whispbar Pages: 15
iDataLink ADS-TBSL-GM Install Manual preview
ADS-TBSL-GM
Brand: iDataLink Pages: 6
SSV Works RG4-DM3 Manual preview
RG4-DM3
Brand: SSV Works Pages: 2
Brodit Getac T800 Quick Start Manual preview
Getac T800
Brand: Brodit Pages: 2
Saturn 2009 OUTLOOK Owner'S Manual preview
2009 OUTLOOK
Brand: Saturn Pages: 432
Acura 2003 3.2 TL Owner'S Manual preview
2003 3.2 TL
Brand: Acura Pages: 347
Toyota Sienna 2000 Operating Manual preview
Sienna 2000
Brand: Toyota Pages: 277

Brands by name

Popular brands

Load more brands