manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

5 7

Driving tips

Driving at night  

Because night driving presents more
hazards than driving in the daylight, here
are some important tips to remember:
• Slow down and keep more distance

between you and other vehicles, as it
may be more difficult to see at night,
especially in areas where there may
not be any street lights.

• Adjust your mirrors to reduce the glare

from other driver's headlights.

• Keep your headlights clean and prop-

erly aimed on vehicles not equipped
with the automatic headlight aiming
feature. Dirty or improperly aimed
headlights will make it much more diffi-
cult to see at night.

• Avoid staring directly at the headlights

of oncoming vehicles. You could be
temporarily blinded, and it will take
several seconds for your eyes to read-
just to the darkness.

Driving in the rain  

Rain and wet roads can make driving
dangerous, especially if you’re not pre-
pared for the slick pavement. Here are a
few things to consider when driving in the
rain:
• A heavy rainfall will make it harder to

see and will increase the distance
needed to stop your vehicle, so slow
down.

• Keep your windshield wiping equip-

ment in good shape. Replace your
windshield wiper blades when they
show signs of streaking or missing
areas on the windshield.

• If your tires are not in good condition,

making a quick stop on wet pavement
can cause a skid and possibly lead to
an accident. Be sure your tires are in
good shape.

• Turn on your headlights to make it eas-

ier for others to see you.

• Driving too fast through large puddles

can affect your brakes. If you must go
through puddles, try to drive through
them slowly.

• If you believe you may have gotten

your brakes wet, apply them lightly
while driving until normal braking oper-
ation returns.

Winter driving

• We recommend that you carry emer-

gency equipment, including tire chains,
a window scraper, windshield de-icer,
a bag of sand or salt, flares, a small
shovel and jumper cables.

• Make sure you have sufficient ethyl-

ene-glycol coolant in the radiator.

• Check the battery condition and

cables. Cold temperatures reduce the
output capability of any battery, so it
must be in excellent condition to pro-
vide enough winter starting power.

• Make sure the engine oil viscosity is

suitable for cold weather.

• Check the ignition system for loose

connections and damage.

• Use antifreeze-formulated windshield

washer fluid. (Do not use engine
coolant antifreeze.)

• Do not use the parking brake if it might

freeze. When parking, shift to 1 (First)
or R (Reverse) with a manual transaxle
or P (Park) with an automatic transaxle
and block the rear wheels.

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

B-Speech B-Speech Prim Manual preview
B-Speech Prim
Brand: B-Speech Pages: 18
Harmar Mobility AL001 Installation And Owner'S Manual preview
AL001
Brand: Harmar Mobility Pages: 10
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
Kia Sportage 2018 Features & Functions Manual preview
Sportage 2018
Brand: Kia Pages: 54
Yuasa SmartShot Automatic 12V 1.5 Amp 5 Stage Technical Manual preview
SmartShot Automatic 12V 1.5 Amp 5 Stage
Brand: Yuasa Pages: 44
Thule Kit 1429 Fitting Instructions Manual preview
Kit 1429
Brand: Thule Pages: 8
EUFAB 16465 Operating Instructions Manual preview
16465
Brand: EUFAB Pages: 12
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
Motoalliance Denali MA11705 Manual preview
Denali MA11705
Brand: Motoalliance Pages: 5
Camoplast T4S Installation Manuallines preview
T4S
Brand: Camoplast Pages: 19
Webasto H300 comfort Operating Instructions Manual preview
H300 comfort
Brand: Webasto Pages: 44
Renault Laguna III Manual preview
Laguna III
Brand: Renault Pages: 3699
K&N Engineering Filtercharger 57-9004 Installation Manual preview
Filtercharger 57-9004
Brand: K&N Engineering Pages: 4
Honda Element 2004 Owner'S Manual preview
Element 2004
Brand: Honda Pages: 219
Westin Sportsman 40-0125 Installation Instructions preview
Sportsman 40-0125
Brand: Westin Pages: 2
Pet Gear PG9050TN Instruction Manual preview
PG9050TN
Brand: Pet Gear Pages: 4
Jeep 2012 Patriot Series Owner'S Manual preview
2012 Patriot Series
Brand: Jeep Pages: 505

Brands by name

Popular brands

Load more brands