manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

7 15

Maintenance

BRAKE FLUID (IF EQUIPPED)

Checking brake fluid level  

Check the fluid level in the reservoir peri-
odically. The fluid level should be
between MAX and MIN marks on the
side of the reservoir.
Before removing the reservoir cap and
adding brake fluid, clean the area around
the reservoir cap thoroughly to prevent
brake fluid contamination.
If your vehicle is equipped with a manual
transaxle, brake fluid is used as clutch
fluid.

If the level is low, add fluid to the MAX
level. The level will fall with accumulated
mileage. This is a normal condition asso-
ciated with the wear of the brake linings.
If the fluid level is excessively low, have
the brake system checked by an author-
ized Kia dealer.

Use only the specified brake fluid. (Refer
to “Recommended Lubricants” later in
this section.)

Never mix different types of fluid.

✽

✽

NOTICE

Do not allow brake fluid to contact the
vehicle's body paint, as paint damage
will result. Brake fluid, which has been
exposed to open air for an extended time
should never be used as its quality can-
not be guaranteed. It should be thrown
out. Don't put in the wrong kind of fluid.
A few drops of mineral-based oil, such
as engine oil, in your brake/clutch sys-
tem can damage brake/clutch system
parts. 

WARNING - 

Brake fluid

When changing and adding brake
fluid, handle it carefully. Do not let it
come in contact with your eyes. If
brake fluid should come in contact
with your eyes, immediately flush
them with a large quantity of fresh
tap water. Have your eyes examined
by a doctor as soon as possible.

WARNING - 

Loss of brake
fluid

In the event the brake system
requires frequent additions of fluid,
the vehicle should be inspected by
an authorized Kia dealer.

1JBA7004

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

JETBAG 320 Fitting Instructions Manual preview
320
Brand: JETBAG Pages: 44
Raytel LLC TellPhone 4200 Installation Instructions & Operating Manual preview
TellPhone 4200
Brand: Raytel LLC Pages: 40
Oldsmobile 2004 Alero Quick Manual preview
2004 Alero
Brand: Oldsmobile Pages: 2
Nuna Bugaboo turtle Instructions For Installation Manual preview
Bugaboo turtle
Brand: Nuna Pages: 17
JKS OGS125 Installation Instructions preview
OGS125
Brand: JKS Pages: 3
VER-MAC PCMS Series Operation, Safety And Maintenance Manual preview
PCMS Series
Brand: VER-MAC Pages: 64
BMW 323Ci Manual preview
323Ci
Brand: BMW Pages: 189
PEUGEOT 108 2017 Vehicle Instruction Card preview
108 2017
Brand: PEUGEOT Pages: 17
Audi Audi 80 1987 Workshop Manual preview
Audi 80 1987
Brand: Audi Pages: 63
Ferve F-2024 Operating Instructions Manual preview
F-2024
Brand: Ferve Pages: 28
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
ULTIMATE SPEED 290923 Operation And Safety Notes preview
290923
Brand: ULTIMATE SPEED Pages: 56
Pyle PLPSC8 User Manual preview
PLPSC8
Brand: Pyle Pages: 14
Ultraplast MD19 User Manual preview
MD19
Brand: Ultraplast Pages: 5
STO N SHO SNS 297 Installation Procedures Manual preview
SNS 297
Brand: STO N SHO Pages: 7
TIS TISPLUS User Manual preview
TISPLUS
Brand: TIS Pages: 6
Ford Mondeo 2007 Owner'S Handbook Manual preview
Mondeo 2007
Brand: Ford Pages: 292
Yakima LockNLoad 9831007 Manual preview
LockNLoad 9831007
Brand: Yakima Pages: 6

Brands by name

Popular brands

Load more brands