manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Driving tips

8

5

Snow tires  

If you mount snow tires on your Kia,
make sure they are radial tires of the
same size and load range as the original
tires. Mount snow tires on all four wheels
to balance your vehicle’s handling in all
weather conditions. Keep in mind that the
traction provided by snow tires on dry
roads may not be as high as your vehi-
cle's original equipment tires. You should
drive cautiously even when the roads are
clear. Check with the tire dealer for max-
imum speed recommendations.

Do not install studded tires without first
checking local, state and municipal regu-
lations for possible restrictions against
their use.

Tire chains 

Since the sidewalls of radial tires are
thinner, they can be damaged by mount-
ing some types of snow chains on them.
Therefore, the use of snow tires is rec-
ommended instead of snow chains. Do
not mount tire chains on vehicles
equipped with aluminum wheels; snow
chains may cause damage to the wheels.
If snow chains must be used, use wire-
type chains with a thickness of less than
0.59 in (15 mm). Damage to your vehicle
caused by improper snow chain use is
not covered by your vehicle manufactur-
ers warranty.
Install tire chains only on the front tires.

✽

✽

NOTICE

• Make sure the snow chains are the

correct size and type for your tires.
Incorrect snow chains can cause dam-
age to the vehicle body and suspension
and may not be covered by your vehi-
cle manufacturer warranty. Also, the
snow chain connecting hooks may be
damaged from contacting vehicle
components causing the snow chains
to come loose from the tire. Make sure
the snow chains are SAE class “S”
certified. 

• Always check chain installation for

proper

mounting after

driving

approximately 0.3 to 0.6 miles (0.5 to 1
km) to ensure safe mounting.
Retighten or remount the chains if
they are loose.

WARNING

- Snow tire size

Snow tires should be equivalent in
size and type to the vehicle's stan-
dard tires. Otherwise, the safety and
handling of your vehicle may be
adversely affected.

1JBA4068

WARNING

If your vehicle is equipped with
205/45R16 size tires, do not install
tire chains. This may cause damage
to the vehicle (wheels, suspension
and body) by chains contacting the
body.

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Jeep Liberty Quick Reference Manual preview
Liberty
Brand: Jeep Pages: 6
Camcar 40104 Mounting Instructions preview
40104
Brand: Camcar Pages: 6
JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
Toyota RX450h 2010 Emergency Response Manual preview
RX450h 2010
Brand: Toyota Pages: 35
Honda 08A28-0J6-800 Installation Instructions Manual preview
08A28-0J6-800
Brand: Honda Pages: 32
Park-Daddy PD50AA Installation Manual preview
PD50AA
Brand: Park-Daddy Pages: 22
UAZ 2001 ???-3741 Instruction Manual preview
2001 ???-3741
Brand: UAZ Pages: 112
Car-Systems Parktronic system Volkswagen Golf MK7 Assembly Manual preview
Parktronic system Volkswagen Golf MK7
Brand: Car-Systems Pages: 10
Motoalliance Denali MA11705 Manual preview
Denali MA11705
Brand: Motoalliance Pages: 5
BMW FXX ATM Emulator User And Installation Manual preview
FXX ATM Emulator
Brand: BMW Pages: 5
Conrad 85 51 49 Operating Instructions Manual preview
85 51 49
Brand: Conrad Pages: 50
PUTCO 1951 Series Instruction Manual preview
1951 Series
Brand: PUTCO Pages: 3
Prime Design URX-001-E Assembly Instructions Manual preview
URX-001-E
Brand: Prime Design Pages: 8
Kuda 293950 Installation Instruction preview
293950
Brand: Kuda Pages: 3
Mitsubishi 2015 OUTLANDER Owner'S Manual preview
2015 OUTLANDER
Brand: Mitsubishi Pages: 490
PEUGEOT 5008 2017 Handbook preview
5008 2017
Brand: PEUGEOT Pages: 404
Federal Signal Corporation Cuda TriOptic 351014F Series Instruction Sheet preview
Cuda TriOptic 351014F Series
Brand: Federal Signal Corporation Pages: 4
Kia Magentis 2002 Owner'S Manual preview
Magentis 2002
Brand: Kia Pages: 216

Brands by name

Popular brands

Load more brands