manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

6 19

In case of an emergency

Changing tires 

Jacking instructions 

The jack is provided for emergency tire
changing only.
Follow jacking instructions to reduce the
possibility of personal injury.

Tire replacement 

1. Park on a level surface and apply the

parking brake firmly.

2. Shift the shift lever into R (Reverse)

with manual transaxle or P (Park) with
automatic transaxle.

3. Activate the hazard warning flasher.

WARNING

- Changing tires

• Never attempt vehicle repairs in

the traffic lanes of a public road
or highway.

• Always move the vehicle com-

pletely off the road and onto the
shoulder before trying to change
a tire. The jack should be used on
level firm ground. If you cannot
find a firm, level place off the
road, call a towing service com-
pany for assistance.

• Be sure to use the correct front

and rear jacking positions on the
vehicle; never use the bumpers or
any other part of the vehicle for
jack support.

(Continued)

(Continued)
• The vehicle can easily roll off the

jack causing serious injury or
death. No person should place
any portion of their body under a
vehicle that is supported only by
a jack ; use vehicle support
stands.

• Do not start or run the engine

while the vehicle is on the jack.

• Do not allow anyone to remain in

the vehicle while it is on the jack.

• Make sure any children present

are in a secure place away from
the road and from the vehicle to
be raised with the jack.

1JBA6021

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
FormFit HD 10L07 Installation Instructions preview
HD 10L07
Brand: FormFit Pages: 2
muth signal mirror 2005-2009 Ford Mustang Installation Instruction preview
signal mirror 2005-2009 Ford Mustang
Brand: muth Pages: 9
Volvo 1996 960 Quick Tips preview
1996 960
Brand: Volvo Pages: 10
Chevrolet Malibu 2014 Owner'S Manual preview
Malibu 2014
Brand: Chevrolet Pages: 428
Zap XEBRA ZAPCAR Series Owner'S Manual preview
XEBRA ZAPCAR Series
Brand: Zap Pages: 16
Ranger design 1506-PHX Cargo Plus Installation Manual preview
1506-PHX Cargo Plus
Brand: Ranger design Pages: 8
AUTOTECH 10.411.01.219K Installation Instructions preview
10.411.01.219K
Brand: AUTOTECH Pages: 1
Lincoln NAUTILUS 2022 Owner'S Manual preview
NAUTILUS 2022
Brand: Lincoln Pages: 586
true-i HMBS-200 User Manual preview
HMBS-200
Brand: true-i Pages: 11
Saab 32 025 907 Installation Instructions Manual preview
32 025 907
Brand: Saab Pages: 37
Acura 2003 3.2 TL Owner'S Manual preview
2003 3.2 TL
Brand: Acura Pages: 347
Charge Amps Halo Pole Mount Manual preview
Halo Pole Mount
Brand: Charge Amps Pages: 14
GAC MOTOR GAC7130H2A5 User Manual preview
GAC7130H2A5
Brand: GAC MOTOR Pages: 356
CaRobotor Y Pro Instruction Manual preview
Y Pro
Brand: CaRobotor Pages: 9
Honda 2011 FIT Owner'S Manual preview
2011 FIT
Brand: Honda Pages: 358
Metra Electronics JP-RGBKT-1 Manual preview
JP-RGBKT-1
Brand: Metra Electronics Pages: 10
Autostart DS4+ Quick Start User Manual preview
DS4+
Brand: Autostart Pages: 1

Brands by name

Popular brands

Load more brands