manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Knowing your vehicle

98

3

✽

✽

NOTICE

• To assure proper operation of the unit,

keep the vehicle interior temperature
within a normal range by using the
vehicle's air conditioning or heating
system.

• When replacing the fuse, replace it

with a fuse having the correct capaci-
ty.

• The preset station frequencies are all

erased when the car battery is discon-
nected. Therefore, all data will have to
be set again if this should occur.

• Do not add any oil to the rotating

parts. Keep magnets, screwdrivers
and other metallic objects away from
the tape mechanism and head.

• This equipment is designed to be used

only in a 12 volt DC battery system
with negative ground.

• This unit is made of precision parts.

Do not attempt to disassemble or
adjust any parts.

(Continued)

(Continued)
• When driving your vehicle, be sure to

keep the volume of the unit set low
enough to allow you to hear sounds
coming from the outside.

• Do not expose this equipment (includ-

ing the speakers and tape) to water or
excessive moisture.

CAUTION

• Do not insert anything like coins

into the player slot as damage to
the unit may occur.

• Do not place beverages close to

the audio system. The playback
mechanism may be damaged if
you spill them.

• Do not strike or allow anything to

impact the audio system, damage
to the system mechanisms could
occur.

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Baja Designs S8 Instructions Manual preview
S8
Brand: Baja Designs Pages: 6
Oldsmobile 2004 Alero Owner'S Manual preview
2004 Alero
Brand: Oldsmobile Pages: 360
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
Cadillac 1999 DeVille Owner'S Manual preview
1999 DeVille
Brand: Cadillac Pages: 368
Luverne 205760 Installation Instructions preview
205760
Brand: Luverne Pages: 3
Navman B2+ User Manual preview
B2+
Brand: Navman Pages: 27
MAcarbon Ferrari 360 Map Carbon Light Installation Instructions preview
Ferrari 360 Map Carbon Light
Brand: MAcarbon Pages: 4
Hyundai Santa Fe 2019 Getting Started Manual preview
Santa Fe 2019
Brand: Hyundai Pages: 18
Guidosimplex 907P User Manual preview
907P
Brand: Guidosimplex Pages: 8
Thule RaceWay 991 Instructions Manual preview
RaceWay 991
Brand: Thule Pages: 12
Saab 2006 9-5 Owner'S Manual preview
2006 9-5
Brand: Saab Pages: 288
Waeco MAGIC WATCH MWE-850-4XXL Installation And Operating Manual preview
MAGIC WATCH MWE-850-4XXL
Brand: Waeco Pages: 228
EUFAB 16559 Operating Instructions Manual preview
16559
Brand: EUFAB Pages: 12
Mid America Motorworks 602-781 Instruction Sheet preview
602-781
Brand: Mid America Motorworks Pages: 2
Westin 40-1245 Installation Instructions preview
40-1245
Brand: Westin Pages: 2
FALCON RIDGE CF-U-1000-RW02 Instructions For Installation And Care preview
CF-U-1000-RW02
Brand: FALCON RIDGE Pages: 8
Paser SKT 170 HYUNDAI Installation Manual preview
SKT 170 HYUNDAI
Brand: Paser Pages: 4

Brands by name

Popular brands

Load more brands