manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

4 7

Driving your vehicle

✽

✽

NOTICE

• To avoid damage to your transaxle, do

not accelerate the engine in R
(Reverse) or any forward gear posi-
tion with the brakes on.

• When stopped on an upgrade, do not

hold the vehicle stationary with
engine power.  Use the service brake
or the parking brake.

• Do not shift from N (Neutral) or P

(Park) into D (Drive), or R (Reverse)
when the engine is above idle speed.

Transaxle ranges

P (Park)

This position locks the transaxle and pre-
vents the front wheels from rotating.
Always come to a complete stop before
shifting into this position.

✽

✽

NOTICE

The transaxle may be damaged if you
shift into P (Park) while the vehicle is in
motion.

R (Reverse)

Use this position to drive the vehicle
backward.

✽

✽

NOTICE

Always come to a complete stop before
shifting into or out of R (Reverse); you
may damage the transaxle if you shift
into R while the vehicle is in motion.

N (Neutral)

With the gearshift in the N position, the
wheels and transaxle are not locked. The
vehicle will roll freely even on the slight-
est incline unless the parking brake or
service brakes are applied.

D (Drive)

This is the normal forward driving posi-
tion. The transaxle will automatically shift
through a 4-gear sequence, providing the
best fuel economy and power.
For extra power when passing another
vehicle or climbing grades, depress the
accelerator fully, at which time the
transaxle will automatically downshift to
the next lower gear.

✽

✽

NOTICE

Always come to a complete stop before
shifting into D (Drive). 

(Continued)
• Do not use the P (Park) position in

place of the parking brake.
Always make sure the shift lever
is latched in the P (Park) position
so that it cannot be moved unless
the lock release button is pushed
in, AND set the parking brake fully.

• Before leaving the driver’s seat,

always make sure the shift lever
is in the P (Park) position. Set the
parking brake fully, shut the
engine off and take the key with
you. Unexpected and sudden
vehicle movement can occur if
you do not follow these precau-
tions in the order specified.

• Never leave a child unattended in

a vehicle.

WARNING

• Shifting into P (Park) while the

vehicle is in motion will cause the
drive wheels to lock which will
cause you to lose control of the
vehicle.

(Continued)

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Federal Signal Corporation 7000 Assembly Instructions Manual preview
7000
Brand: Federal Signal Corporation Pages: 13
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Ironton 44596 Owner'S Manual preview
44596
Brand: Ironton Pages: 7
VDO DLD Wide Range II Installation Instructions Manual preview
DLD Wide Range II
Brand: VDO Pages: 84
Wagan TravelCharge Companion GO-Plus User Manual preview
TravelCharge Companion GO-Plus
Brand: Wagan Pages: 3
Fab Fours F2950 Installation Instructions Manual preview
F2950
Brand: Fab Fours Pages: 21
Westfalia 305 158 Mounting Instructions preview
305 158
Brand: Westfalia Pages: 10
RBO RBO4038 Product Manual preview
RBO4038
Brand: RBO Pages: 15
Pacbrake HP10098 Installation Manual preview
HP10098
Brand: Pacbrake Pages: 6
Lincoln NAUTILUS 2022 Owner'S Manual preview
NAUTILUS 2022
Brand: Lincoln Pages: 586
SAFARI SS18HF Manual preview
SS18HF
Brand: SAFARI Pages: 5
Subaru 2015 Forester Quick Reference Manual preview
2015 Forester
Brand: Subaru Pages: 16
Lund Tonno Pro Installation Instructions Manual preview
Tonno Pro
Brand: Lund Pages: 12
Magneti Marelli AC911 Installation Instruction preview
AC911
Brand: Magneti Marelli Pages: 3
Safe Fleet RVS-218629 Instruction Manual preview
RVS-218629
Brand: Safe Fleet Pages: 28
Hyundai TUCSON 2022 Quick Reference Manual preview
TUCSON 2022
Brand: Hyundai Pages: 32
Panavise Indash 75114-296 Installation Instructions preview
Indash 75114-296
Brand: Panavise Pages: 2

Brands by name

Popular brands

Load more brands