manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

5 15

Driving tips

WEIGHT OF THE VEHICLE

This section will guide you in the
proper loading of your vehicle and/or
trailer, to keep your loaded vehicle
weight within its design rating capa-
bility, with or without a trailer.
Properly loading your vehicle will
provide maximum return of the vehi-
cle design performance. Before load-
ing your vehicle, familiarize yourself
with the following terms for determin-
ing your vehicle's weight ratings, with
or without a trailer, from the vehicle's
specifications and the compliance
label:
Base curb weight 
This is the weight of the vehicle
including a full tank of fuel and all
standard equipment. It does not
include passengers, cargo, or option-
al equipment.
Vehicle curb weight
This is the weight of your new vehicle
when you picked it up from your deal-
er plus any aftermarket equipment.
Cargo weight
This figure includes all weight added
to the Base Curb Weight, including
cargo and optional equipment.

GAW (Gross axle weight)
This is the total weight placed on
each axle (front and rear) - including
vehicle curb weight and all payload.
GAWR (Gross axle weight rating)
This is the maximum allowable
weight that can be carried by a single
axle (front or rear). These numbers
are shown on the compliance label.
The total load on each axle must
never exceed its GAWR.
GVW (Gross vehicle weight)
This is the Base Curb Weight plus
actual Cargo Weight plus passen-
gers.
GVWR (Gross vehicle weight rating)
This is the maximum allowable
weight of the fully loaded vehicle
(including all options, equipment,
passengers and cargo). The GVWR
is shown on the compliance label
located on the driver’s door sill.

We do not recommend using this
vehicle for trailer towing.

TRAILER TOWING

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

TATA Motors Safari Owner'S Manual & Service Book preview
Safari
Brand: TATA Motors Pages: 161
TAUBENREUTHER 16 - 590 Fitting Instructions Manual preview
16 - 590
Brand: TAUBENREUTHER Pages: 11
Yakima SKYBOX Series Manual preview
SKYBOX Series
Brand: Yakima Pages: 15
Romik 2137 2D Installation Instructions Manual preview
2137 2D
Brand: Romik Pages: 6
TATA Motors Indigo MANZA QUADRAJET 90 Owner'S Manual & Service Book preview
Indigo MANZA QUADRAJET 90
Brand: TATA Motors Pages: 10
RAM 2011 DAKOTA User Manual preview
2011 DAKOTA
Brand: RAM Pages: 76
Advantech TREK-550 Manual preview
TREK-550
Brand: Advantech Pages: 59
Monacor Carpower CAP-20 Quick Manual preview
Carpower CAP-20
Brand: Monacor Pages: 2
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Power Acoustik METER 4 Installation preview
METER 4
Brand: Power Acoustik Pages: 4
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
Volvo Ski box Installation Instructions Manual preview
Ski box
Brand: Volvo Pages: 7
BMW 325i 1991 Electrical Troubleshooting Manual preview
325i 1991
Brand: BMW Pages: 64
Chrysler DODGE AD100 1993 Service Manual preview
DODGE AD100 1993
Brand: Chrysler Pages: 1502
Classic Accessories 80-485-142401-RT Instructions Manual preview
80-485-142401-RT
Brand: Classic Accessories Pages: 14
Stack ROLL POD Installation Manual preview
ROLL POD
Brand: Stack Pages: 4
Subaru 2001 Forester Service Manual preview
2001 Forester
Brand: Subaru Pages: 9
Blue Ox BX2711 Installation Instructions Manual preview
BX2711
Brand: Blue Ox Pages: 8

Brands by name

Popular brands

Load more brands