manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

3 37

Knowing your vehicle

Child restraint system 

For small children and babies, the use of
a child seat or infant seat is strongly rec-
ommended and is required by law in
almost all states. This child seat or infant
seat should be of appropriate size for the
child and should be installed in accor-
dance with the manufacturer's instruc-
tions.
Children riding in the car should sit on
the rear seat and must always be proper-
ly restrained to minimize the risk of injury
in an accident, sudden stop or sudden
maneuver. According to accident statis-
tics, children are safer when properly
restrained in the rear seats than in the
front seat.
Children could be injured or killed in a
crash if their restraints are not properly
secured. For small children and babies, a
child seat or infant seat must be used.
Before buying a particular child restraint
system, make sure it fits your car and
seat belts, and fits your child. Follow all
the instructions provided by the child
seat manufacturer when installing the
child restraint system.

1JBH3051

WARNING

- 

Child
restraints

• A child restraint system must be

placed in the rear seat. Never
install a child or infant seat on the
front passenger’s seat.
Should an accident occur and
cause the passenger air bag to
deploy, it could severely injure or
kill an infant or child seated in the
front seat.

(Continued)

(Continued)
• Since a safety belt or child

restraint system can become very
hot if it is in a closed vehicle, be
sure to check the seat cover and
buckles before placing a child
there.

• When the child restraint system

is not in use, store it in the trunk
or fasten it with a safety belt so
that it will not be thrown forward
in the case of a sudden stop or an
accident.

• Children who are too large to be

in a child restraint should sit in
the rear seat and be restrained
with the available lap/shoulder
belts.

• When using the vehicles

lap/shoulder safety belts, always
make sure that the shoulder belt
portion is positioned midway over
the shoulder, never across the
neck or behind the back. The lap
belt portion of the lap/shoulder
belt must always be positioned as
low as possible on the child's hips
and as snug as possible.

(Continued)

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Jeep Liberty Quick Reference Manual preview
Liberty
Brand: Jeep Pages: 6
Safe Fleet PRIME DESIGN VCR 326 Assembly Instructions Manual preview
PRIME DESIGN VCR 326
Brand: Safe Fleet Pages: 16
Safe Fleet Prime Design VBC PC11 Quick Start Manual preview
Prime Design VBC PC11
Brand: Safe Fleet Pages: 8
Safe Fleet Prime Design AR1418 Manual preview
Prime Design AR1418
Brand: Safe Fleet Pages: 4
TrailFX A4012S Installation Instructions Manual preview
A4012S
Brand: TrailFX Pages: 6
Whispbar K919W Fitting Instructions Manual preview
K919W
Brand: Whispbar Pages: 17
AEM 30-3500 Instruction Manual preview
30-3500
Brand: AEM Pages: 27
THIEYE CarView 2 User Manual preview
CarView 2
Brand: THIEYE Pages: 88
Acura 08L07-TA1-203 Installation Instructions Manual preview
08L07-TA1-203
Brand: Acura Pages: 6
rough country 921107830 Installation Instruction preview
921107830
Brand: rough country Pages: 4
DEFA MultiCharger 1204 User'S Installation Manual preview
MultiCharger 1204
Brand: DEFA Pages: 28
Steelmate PTS800V7 User Manual preview
PTS800V7
Brand: Steelmate Pages: 14
Toro Security Cage Kit Installation Instructions Manual preview
Security Cage Kit
Brand: Toro Pages: 8
ROADGEAR RGABM1 User Manual & Fitting Instructions preview
RGABM1
Brand: ROADGEAR Pages: 2
RAM RAM C 2013 Specification preview
RAM C 2013
Brand: RAM Pages: 5
Spracht Aura Mobile BT MCP-2014 Quick Start Manual preview
Aura Mobile BT MCP-2014
Brand: Spracht Pages: 2
Genesis GV60 2022 Quick Reference Manual preview
GV60 2022
Brand: Genesis Pages: 29
Fiat FIORINO Owner'S Handbook Manual preview
FIORINO
Brand: Fiat Pages: 220

Brands by name

Popular brands

Load more brands