manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Knowing your vehicle

32

3

✽

✽

NOTICE

When returning the rear seatbacks to
the upright position, remember to
return the rear shoulder belts to their
proper position. Routing the safety belt
webbing through the rear safety belt
guides will help keep the belts from
being trapped behind or under the seats. 

3 Point rear center belt 
(if equipped) 

To fasten the rear center belt

1. Insert the tongue plate (A) into the

open end of the anchor connector (B)
until an audible “click" is heard, indi-
cating the latch is locked. Make sure
the belt is not twisted.

WARNING

• Never wear the shoulder portion

of the safety belt under the out-
side arm or behind the back.

• Never wear the shoulder portion

of the safety belt across the neck
or face.

• Wear the lap portion of the safety

belt as low as possible. Be sure
the lap belt fits snugly around the
hips. Never wear the lap belt over
your waist.

• Never drive or ride with a twisted

or jammed safety belt. If you can-
not untwist or unjam the safety
belt, see the nearest Kia dealer
immediately.

• Never use a single belt to restrain

more than one person at a time.

Failure to follow these warnings will
increase the risk and severity of
injury or may result in death in an
accident.

1JBA3115

4 Door

1JBA3048

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

PAC I GM3 Instruction Manual preview
I GM3
Brand: PAC Pages: 15
iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
Napoli NPL-TV 7874 DIGITAL Instruction Manual preview
NPL-TV 7874 DIGITAL
Brand: Napoli Pages: 20
Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26
Vauxhall Meriva 2014 Infotainment Manual preview
Meriva 2014
Brand: Vauxhall Pages: 131
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
Mercedes-Benz CLS 2015 Operator'S Manual preview
CLS 2015
Brand: Mercedes-Benz Pages: 398
Cadillac ESCALADE ESV 2005 Owner'S Manual preview
ESCALADE ESV 2005
Brand: Cadillac Pages: 482
curt CM-58967 Installation Manual preview
CM-58967
Brand: curt Pages: 4
T.J.M. T13 Outback Frontal Protection System Fitting Instructions Manual preview
T13 Outback Frontal Protection System
Brand: T.J.M. Pages: 18
Audi PXDXVW3 Quick Start Manual preview
PXDXVW3
Brand: Audi Pages: 4
iSimple IS7705 Installation & Operation Manual preview
IS7705
Brand: iSimple Pages: 8
Scosche VQ2M Manual preview
VQ2M
Brand: Scosche Pages: 32
Spracht Aura Mobile BT MCP-2014 Quick Start Manual preview
Aura Mobile BT MCP-2014
Brand: Spracht Pages: 2
Quadratec 12057.0102 Installation Manual preview
12057.0102
Brand: Quadratec Pages: 8
Edelbrock 4789 Installation Instructions preview
4789
Brand: Edelbrock Pages: 2
Monster iCarPlay Direct Connect 2000 User Manual & Warranty Information preview
iCarPlay Direct Connect 2000
Brand: Monster Pages: 66

Brands by name

Popular brands

Load more brands