manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

3 61

Knowing your vehicle

Air bag system operation 

• Air bags only operate when the ignition

switch is turned to the ON or START
positions.

• Air bags inflate instantly in the event of

serious frontal or side collision (if
equipped with side air bag or curtain
air bag) in order to help protect the
occupants from serious physical injury.

• There is no single vehicle speed at

which the air bags will inflate.

• Air bag deployment depends on a

number of factors including vehicle
speed, angles of impact and the densi-
ty and stiffness of the vehicles or
objects which your vehicle hits in the
collision. However, factors are not limit-
ed to those mentioned above.

• The front air bags will completely

inflate and deflate in an instant.
It is virtually impossible for you to see
the air bags inflate during an accident.
It is much more likely that you will sim-
ply see the deflated air bags hanging
out of their storage compartments after
the collision.

• In order to help provide protection in a

severe collision, the air bags must
inflate rapidly. The speed of air bag
inflation is a consequence of the
extremely short time in which a collision
occurs and the need to get the air bag
between the occupant and the vehicle
structures before the occupant impacts
those structures. This speed of inflation
reduces the risk of serious or life-
threatening injuries in a severe collision
and is thus a necessary part of air bag
design.
However, air bag inflation can also
cause injuries which normally can
include facial abrasions, bruises and
broken bones, and sometimes more
serious injuries because the inflation
speed also causes the air bags to
expand with a great deal of force.

• There are even circumstances

under which contact with the steer-
ing wheel air bag can cause fatal
injuries, especially if the occupant
is positioned excessively close to
the steering wheel.

WARNING - 

Seated 
positioning

• To avoid severe personal injury or

death caused by deploying air
bags in a collision, the driver
should sit as far back from the
steering wheel air bag as possible
(at least 10 inches (250 mm) away).
The front passenger should
always move their seat as far back
as possible and sit back in their
seat.

• Air bag inflates instantly in an

event of collision, passengers
may be injured by the air bag
expansion force if they are not in
proper position.

• Air bag inflation may cause

injuries which normally include
facial or bodily abrasions, injuries
by the broken glasses or burns by
the explosives.

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
Dakota Digital VHX-37F Installation preview
VHX-37F
Brand: Dakota Digital Pages: 2
Dakota Digital BIM-01-2 Manual preview
BIM-01-2
Brand: Dakota Digital Pages: 7
Ultra Start KE-6 Owner'S Manual preview
KE-6
Brand: Ultra Start Pages: 8
Barker 25895 Owner'S Instructions preview
25895
Brand: Barker Pages: 2
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
Alpine eX-10 Owner'S Manual preview
eX-10
Brand: Alpine Pages: 69
Allen Sports S302 Instructions preview
S302
Brand: Allen Sports Pages: 2
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
Kia Sportage 2018 Features & Functions Manual preview
Sportage 2018
Brand: Kia Pages: 54
FAAFTECH FT-VF-HND2 Installation Manual preview
FT-VF-HND2
Brand: FAAFTECH Pages: 8
AutoMaxi AXIS XXL Instructions preview
AXIS XXL
Brand: AutoMaxi Pages: 2
Mercedes-Benz R 350 2012 Operator'S Manual preview
R 350 2012
Brand: Mercedes-Benz Pages: 368
Mazda 2006 RX-8 Service Highlights preview
2006 RX-8
Brand: Mazda Pages: 122
Jeep 2014 Grand Cherokee SRT8 Owner'S Manual preview
2014 Grand Cherokee SRT8
Brand: Jeep Pages: 596
Skoda 1K0 051 437 Assembly Instructions preview
1K0 051 437
Brand: Skoda Pages: 4

Brands by name

Popular brands

Load more brands