Kia Rio 2007 Manual Download Page 186

Page: 186 / 256

In case of an emergency

4. Remove the wheel lug nut wrench,

jack, jack handle, and spare tire from
the vehicle.

5. Block both the front and rear of the

wheel that is diagonally opposite the
jack position.

6. Wrap a piece of cloth around the tip of

the screwdriver to avoid scratching.

Insert a screwdriver into the notch of
the wheel cover and pry gently to
remove the wheel cover (if equipped).

WARNING

- Changing a tire

• To prevent vehicle movement

while changing a tire, always set
the parking brake fully, and
always block the wheel diagonal-
ly opposite the wheel being
changed.

• It is recommended that the

wheels of the vehicle be chocked,
and that no person should remain
in a vehicle that is being jacked.

1JBA6504

1JBA6023

Summary of Contents for Rio 2007

































































































































































































































































Search results

Summary of Contents for Rio 2007

Reviews:

Related manuals for Rio 2007

Brands by name

Popular brands

Kia Rio 2007, Manual

Search results

Summary of Contents for Rio 2007

Reviews:

Related manuals for Rio 2007

Brands by name

Popular brands