manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

4 11

Driving your vehicle

To release the parking brake, pull the
handle up slightly and push the release
button, then lower the handle to the
released position while holding the but-
ton in.

Check the brake warning light by turning
the ignition switch ON (do not start the
engine). This light will be illuminated
when the parking brake is applied with
the ignition switch in the START or ON
position.
Before driving, be sure the parking brake
is fully released and the brake warning
light is off.
If the brake warning light remains on
after the parking brake is released, there
may be a malfunction in the brake sys-
tem. Immediate attention is necessary.
If at all possible, cease driving the vehi-
cle immediately. If that is not possible,
use extreme caution while operating the
vehicle and only continue to drive the
vehicle until you can reach a safe loca-
tion or repair shop.

WARNING

- Parking brake

• To prevent unintentional move-

ment when stopped and leaving
the vehicle, do not use the
gearshift lever in place of the
parking brake. Set the parking
brake AND make sure the
gearshift lever is securely posi-
tioned in 1st (First) gear or R
(Reverse) for manual transaxle
equipped vehicles and in P (Park)
for automatic transaxle equipped
vehicles.

• Never allow a person who is unfa-

miliar with the vehicle or children
to touch the parking brake. If the
parking brake is released unin-
tentionally, serious injury may
occur.

W-75

1JBA4006

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Jeda Wireless Pad Manual preview
Wireless Pad
Brand: Jeda Pages: 8
Jeep 2009 Wrangler Owner'S Manual preview
2009 Wrangler
Brand: Jeep Pages: 496
Bimmer Jakes FRONT HEADLIGHT LENS COVER Replacement Manual preview
FRONT HEADLIGHT LENS COVER
Brand: Bimmer Jakes Pages: 4
Dakota Digital Retrotech RTX-68D-CHG Quick Start Manual preview
Retrotech RTX-68D-CHG
Brand: Dakota Digital Pages: 4
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
Yakima Whispbar K887W Fitting Instructions Manual preview
Whispbar K887W
Brand: Yakima Pages: 19
Nav TV UCI-11C NTV-KIT331 User Manual preview
UCI-11C NTV-KIT331
Brand: Nav TV Pages: 4
Camcar 40108 Mounting Instructions preview
40108
Brand: Camcar Pages: 6
ABL eMH3 Quick Start Manual preview
eMH3
Brand: ABL Pages: 4
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Pyle PLDCP3 User Manual preview
PLDCP3
Brand: Pyle Pages: 2
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
WABCO TP19039 Manual preview
TP19039
Brand: WABCO Pages: 34
newmotion Dynamic Power Management Home - Module Installation Instruction preview
Dynamic Power Management Home - Module
Brand: newmotion Pages: 20
Aston Martin V8 Vantage Workshop Manual preview
V8 Vantage
Brand: Aston Martin Pages: 415
CARFACE CF145962E Instruction Manual preview
CF145962E
Brand: CARFACE Pages: 16

Brands by name

Popular brands

Load more brands