manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Driving your vehicle

2

4

Ignition switch and anti-theft
steering column lock     

Ignition switch position

LOCK

The steering wheel locks to protect
against theft. The ignition key can be
removed only in the LOCK position.
When turning the ignition switch to the
LOCK position, push the key inward at
the ACC position and turn the key toward
the LOCK position (manual transaxle).

ACC (Accessory)

The steering wheel is unlocked and elec-
trical accessories are operative.

ON

This is the normal running position after
the engine is started. The warning lights
can be checked before the engine is
started.
Do not leave the ignition switch ON if the
engine is not running to prevent battery
discharge.

START

Turn the ignition key to the START posi-
tion to start the engine. The engine will
crank until you release the key; then it
returns to the ON position. The brake
warning lamp can be checked in this
position.

✽

✽

NOTICE

If it is difficult to turn the ignition key to
the START position, turn the steering
wheel right and left to release resistance
and then turn the key.

Automatic transaxle

When turning the ignition switch to the
LOCK position, the shift lever must be in
the P (Park) position.

Illuminated ignition switch

Whenever a door is opened, the ignition
switch will be illuminated for your con-
venience, provided the ignition switch is
not in the ON position. The light will go off
approximately 30 seconds after closing
the door or when the ignition switch is
turned on.

IGNITION SWITCH

1JBH3201

1JBN3201

Manual Transaxle

Automatic Transaxle

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Ultra Start KE-6 Owner'S Manual preview
KE-6
Brand: Ultra Start Pages: 8
Vauxhall MOVANO Owner'S Manual preview
MOVANO
Brand: Vauxhall Pages: 177
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
EEZ RV 51 SC Instruction Manual preview
51 SC
Brand: EEZ RV Pages: 31
Easee Home Wallbox Installation Instructions Manual preview
Home Wallbox
Brand: Easee Pages: 12
Volvo V70XC Cross country 1998 Owner'S Manual preview
V70XC Cross country 1998
Brand: Volvo Pages: 262
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
Toyota Sienna 2021 Manual preview
Sienna 2021
Brand: Toyota Pages: 600
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
Jeep CHEROKEE 2017 User Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 374
BMW i wallbox Installation Instructions Manual preview
i wallbox
Brand: BMW Pages: 40
Phonocar 6/946 Instruction Manual preview
6/946
Brand: Phonocar Pages: 4
Stanley GLPS Instruction Manual preview
GLPS
Brand: Stanley Pages: 6
FALCON RIDGE AC-PRO-WD05 Instructions For Installation And Care preview
AC-PRO-WD05
Brand: FALCON RIDGE Pages: 5
Jeep Cherokee 2009 Operating Information Manual preview
Cherokee 2009
Brand: Jeep Pages: 223

Brands by name

Popular brands

Load more brands