manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Maintenance

2

7

MAINTENANCE SERVICES

You should exercise the utmost care to
prevent damage to your vehicle and
injury to yourself whenever performing
any maintenance or inspection proce-
dures.
Should you have any doubts concerning
the inspection or servicing of your vehi-
cle, we strongly recommend that you
have an authorized Kia dealer perform
this work.
An authorized Kia dealer has factory-
trained technicians and genuine Kia
parts to service your vehicle properly. For
expert advice and quality service, see an
authorized Kia dealer.
Inadequate, incomplete or insufficient
servicing may result in operational prob-
lems with your vehicle that could lead to
vehicle damage, an accident, or person-
al injury.

Owner’s responsibility  

Maintenance Service and Record
Retention are the owner's responsibil-
ity.
You should retain documents that show
proper maintenance has been performed
on your vehicle in accordance with the
scheduled maintenance service charts
shown on the following pages. You need
this information to establish your compli-
ance with the servicing and maintenance
requirements of your Kia warranties.
Detailed warranty information is provided
in your Warranty & Consumer Information
manual.
Repairs and adjustments required as a
result of improper maintenance or a lack
of required maintenance are not covered.
We recommend you have your vehicle
maintained and repaired by an author-
ized Kia dealer.
An authorized Kia dealer meets Kia's
high service quality standards and
receives technical support from Kia in
order to provide you with a high level of
service satisfaction.

Scheduled maintenance service  

If none of the following conditions are
applicable, then use Schedule 1 –
Normal Maintenance.
• Repeated short distance driving.
• Driving in dusty conditions or sandy

areas.

• Extensive use of brakes.
• Driving in areas where salt or other

corrosive materials are being used.

• Driving on rough or muddy roads.
• Driving in mountainous areas.
• Extended periods of idling or low

speed operation.

• Driving for a prolonged period in cold

temperatures and/or extremely humid
climates.

• More than 50% driving in heavy city

traffic during hot weather above 90°F
(32°C).

However, if any of the preceding condi-
tions apply, follow Schedule 2 – Severe
Maintenance.
After 105 months or 105,000 miles
(168,000 km) continue to follow the pre-
scribed maintenance intervals.

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
TBC DPI1K User Manual preview
DPI1K
Brand: TBC Pages: 12
Whispbar K934W Fitting Instructions Manual preview
K934W
Brand: Whispbar Pages: 15
Chevrolet 2013 Spark Specifications preview
2013 Spark
Brand: Chevrolet Pages: 2
K&M MILSCO KIT# C746700 Installation Manual preview
MILSCO KIT# C746700
Brand: K&M Pages: 2
Car-Interface CI-RL4-NAC12 Manual preview
CI-RL4-NAC12
Brand: Car-Interface Pages: 25
Thule 2 Bike Carrier 977 Instructions Manual preview
2 Bike Carrier 977
Brand: Thule Pages: 6
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
ULTIMATE SPEED 279746 Assembly And Safety Advice preview
279746
Brand: ULTIMATE SPEED Pages: 6
SAN HIMA SGBR015 Installation Instructions Manual preview
SGBR015
Brand: SAN HIMA Pages: 10
E&G Classics 1398-0502-09 Instruction Manual preview
1398-0502-09
Brand: E&G Classics Pages: 2
Oldsmobile 2003 Alero Owner'S Manual preview
2003 Alero
Brand: Oldsmobile Pages: 354
ICON 91824E Installation Instructions preview
91824E
Brand: ICON Pages: 4
Mercedes-Benz CLS 2015 Operator'S Manual preview
CLS 2015
Brand: Mercedes-Benz Pages: 398
Lippert Stargazer Spirit XTR Skylight Installation Manual preview
Stargazer Spirit XTR Skylight
Brand: Lippert Pages: 8

Brands by name

Popular brands

Load more brands