manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

4 33

Driving your vehicle

Air intake control button                 

This is used to select outside (fresh) air
position or recirculated air position.
To change the air intake control position,
push the control button.

Recirculated air position      

The indicator light on the but-
ton is illuminated when the
recirculated air position is
selected.
With the recirculated air posi-
tion selected, air from pas-
senger compartment will be
drawn through the heating
system and heated or cooled
according to the function
selected.

Outside (fresh) air position  

The indicator light on the but-
ton is  not illuminated when
the outside (fresh) air posi-
tion is selected.
With the outside (fresh) air
position  selected, air enters
the vehicle from outside and
is heated or cooled according
to the function selected.

✽

✽

NOTICE

It should be noted that prolonged oper-
ation of the heating in recirculated air
position will cause fogging of the wind-
shield and side windows and the air
within the passenger compartment will
become stale.
In addition, prolonged use of the air
conditioning with the “recirculated air
position” selected, will result in exces-
sively dry air in the passenger compart-
ment. 

1JBN4029

WARNING

• Continued climate control system

operation in the recirculated air
position may allow humidity to
increase inside vehicle which
may fog the glass and obscure
visibility.

• Do not sleep in a vehicle with air

conditioning or heating system
on. It may cause serious harm or
death due to a drop in the oxygen
level and/or body temperature.

• Continued climate control system

operation in the recirculated air
position can cause drowsiness or
sleepiness, and loss of vehicle
control. Set the air intake control
to the outside (fresh) air position
as much as possible while driv-
ing.

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
Kargo Master 80070 Assembly Lnstructions preview
80070
Brand: Kargo Master Pages: 13
Kargo Master 4A96L Installation Manual preview
4A96L
Brand: Kargo Master Pages: 21
Kargo Master 40201 Installation Manual preview
40201
Brand: Kargo Master Pages: 4
Carefree Slideout Cover Service Manual preview
Slideout Cover
Brand: Carefree Pages: 12
Whispbar K611W Fitting Instructions Manual preview
K611W
Brand: Whispbar Pages: 77
Toyota AURION 2013 Owner'S Manual preview
AURION 2013
Brand: Toyota Pages: 371
BMW E39/2 Installation Instructions Manual preview
E39/2
Brand: BMW Pages: 21
Camoplast Polaris TATOU 4S Installation Manuallines preview
Polaris TATOU 4S
Brand: Camoplast Pages: 13
Dakota Digital LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne... Installation Instructions preview
LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne...
Brand: Dakota Digital Pages: 3
Ranger design 1506-PHX Cargo Plus Installation Manual preview
1506-PHX Cargo Plus
Brand: Ranger design Pages: 8
AUTOTECH 10.411.01.219K Installation Instructions preview
10.411.01.219K
Brand: AUTOTECH Pages: 1
Bestop Bikini Installation Instructions preview
Bikini
Brand: Bestop Pages: 5
PowerMadd Tri-mount Installation Instructions preview
Tri-mount
Brand: PowerMadd Pages: 3
OHIOSTEEL 1084TR Quick Start Manual preview
1084TR
Brand: OHIOSTEEL Pages: 2
Acura TSX 2014 Advanced Technology Manual preview
TSX 2014
Brand: Acura Pages: 19
Ford 2009 Edge Owner'S Manual preview
2009 Edge
Brand: Ford Pages: 325
v.link CI-VL2-PC-HSD Manual preview
CI-VL2-PC-HSD
Brand: v.link Pages: 19

Brands by name

Popular brands

Load more brands