manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

5 13

Driving tips

Compliance label

The compliance label is located on
the driver's door sill.
This label shows the maximum
allowable weight of the fully loaded
vehicle. This is called the GVWR
(Gross Vehicle Weight Rating). The
GVWR includes the weight of the
vehicle, all occupants, fuel and
cargo.

This label also tells you the maxi-
mum weight that can be supported
by the front and rear axles, called
Gross Axle Weight Rating (GAWR).
To find out the actual loads on your
front and rear axles, you need to go
to a weigh station and weigh your
vehicle.Your dealer can help you with
this. Be sure to spread out your load
equally on both sides of the center-
line.

1JBN5901

WARNING - 

Over loading

• Never exceed the GVWR for

your vehicle, the GAWR for
either the front or rear axle
and vehicle capacity weight.
Exceeding these ratings can
cause an accident or vehicle
damage. You can calculate the
weight of your load by weigh-
ing the items (or people)
before putting them in the
vehicle. Be careful not to over-
load your vehicle.

• Do not load your vehicle any

heavier than the GVWR, either
the maximum front or rear
GAWR and vehicle capacity
weight. If you do, parts, includ-
ing tires on your vehicle can
break, and it can change the
way your vehicle handles and
braking ability. This could
cause you to lose control and
crash. Also, overloading can
shorten the life of your vehi-
cle.

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

N-Com B3 User Instructions And Safety preview
B3
Brand: N-Com Pages: 28
Gator GX5HDKT User Manual preview
GX5HDKT
Brand: Gator Pages: 8
Cadillac Escalade ESV 2014 Owner'S Manual preview
Escalade ESV 2014
Brand: Cadillac Pages: 508
Hama Liberty III Quick Start Manual preview
Liberty III
Brand: Hama Pages: 2
BMW E46/2 Coupe Manual preview
E46/2 Coupe
Brand: BMW Pages: 55
Whispbar K496W Fitting Instructions Manual preview
K496W
Brand: Whispbar Pages: 15
Hyundai SANTA FE 2020 Getting Started Manual preview
SANTA FE 2020
Brand: Hyundai Pages: 19
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
Caraudio-Systems RL-LR12-TF Manual preview
RL-LR12-TF
Brand: Caraudio-Systems Pages: 9
Prorack K577W Fitting Instructions Manual preview
K577W
Brand: Prorack Pages: 15
BraunAbility Rampvan Maintenance And Service Manual preview
Rampvan
Brand: BraunAbility Pages: 46
Brigade VBV-770-310 Quick Installation Manual preview
VBV-770-310
Brand: Brigade Pages: 12
Subaru 2015 Forester Quick Reference Manual preview
2015 Forester
Brand: Subaru Pages: 16
wtw spectroFlex Car Adapter Operating Manual preview
spectroFlex Car Adapter
Brand: wtw Pages: 4
Porsche 92854 Owner'S Manual preview
92854
Brand: Porsche Pages: 145
Vmac A700308 Installation Manual preview
A700308
Brand: Vmac Pages: 16
Buick Enclave Owner'S Manual preview
Enclave
Brand: Buick Pages: 394

Brands by name

Popular brands

Load more brands