manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Maintenance

42

7

License plate light bulb replace-
ment 

1. Remove the lens.
2. Remove the bulb by pulling it straight

out.

3. Install a new bulb.
4. Reinstall the lens securely.

Rear combination light bulb
replacement

(1) Rear turn signal light
(2) Back-up light
(3) Stop and tail light
1. Open the trunk lid or rear hatch.

2. 4 Door

Remove the service cover by turning
the plastic screw counterclockwise and
removing the cover.
5 Door
Loosen the light assembly retaining
screws with a cross-tip screwdriver.
Remove the rear combination light
assembly from the body of the vehicle.

1JBA7026

1JBA7028

1JBA7042

4 Door

5 Door

1JBB6017

1JBB6017A

4 Door

5 Door

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
Jeep 2014 Grand Cherokee SRT8 Owner'S Manual preview
2014 Grand Cherokee SRT8
Brand: Jeep Pages: 596
Skoda 1K0 051 437 Assembly Instructions preview
1K0 051 437
Brand: Skoda Pages: 4
Prorack WHISPBAR S53 Fitting Instructions For Basic Carrier preview
WHISPBAR S53
Brand: Prorack Pages: 10
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
Lexus LS 460 2011 Owner'S Manual preview
LS 460 2011
Brand: Lexus Pages: 830
Buick 1997 Skylark Owner'S Manual preview
1997 Skylark
Brand: Buick Pages: 371
Brodit ProClip 854399 Installation Instructions preview
ProClip 854399
Brand: Brodit Pages: 2
Flash Cover MN012 Installation Manual preview
MN012
Brand: Flash Cover Pages: 2
Kleinn Air Horns RNGR-102-1/220 Installation Manual preview
RNGR-102-1/220
Brand: Kleinn Air Horns Pages: 33
Haltech PLATINUM HT051202 Quick Start Manual preview
PLATINUM HT051202
Brand: Haltech Pages: 10
Subaru 2001 Forester Service Manual preview
2001 Forester
Brand: Subaru Pages: 9
Over Armour Offroad TX-STAMP-4-TC01 Instructions For Installation And Care preview
TX-STAMP-4-TC01
Brand: Over Armour Offroad Pages: 4
Jaeger 12500628 Fitting Instructions Manual preview
12500628
Brand: Jaeger Pages: 17

Brands by name

Popular brands

Load more brands