Kia Rio 2007 Manual Download Page 31

Page: 31 / 256

Knowing your vehicle

5. Move the rear lap/shoulder belt to the

outside (2) so that they don’t interfere
with the seatback when lowering (3).

6. Fold the seatback forward and down

firmly (4).

5 Door (if equipped)

1. Set the front seatback to the upright

position and slide the front seat for-
ward.

2. Pull the seat cushion retaining strap (1)

and lift the front of the seat cushion.

3. Lift the rear of seat cushion (2).

4. Fold the seat cushion forward firmly

into place (3).

5. Remove the headrest from the rear

seatback and stow the headrest by
inserting the headrest poles into the
holes on the bottom of the seat cush-
ion (4).

1JBA3027

1JBA3028

1JBA3502

1JBA3503

1JBA3504

1JBA3505

Summary of Contents for Rio 2007

































































































































































































































































Search results

Summary of Contents for Rio 2007

Reviews:

Related manuals for Rio 2007

Brands by name

Popular brands

Kia Rio 2007, Manual

Search results

Summary of Contents for Rio 2007

Reviews:

Related manuals for Rio 2007

Brands by name

Popular brands