manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

4 21

Driving your vehicle

Low brake fluid level warning

If the warning light remains on, it may
indicate that the brake fluid level in the
reservoir is low.
If the warning light remains on:
1. Drive carefully to the nearest safe

location and stop your vehicle.

2. With the engine stopped, check the

brake fluid level immediately and add
fluid as required. Then check all brake
components for fluid leaks.

3. Do not drive the vehicle if leaks are

found, the warning light remains on or
the brakes do not operate properly.
Have it towed to any authorized Kia
dealer for a brake system inspection
and necessary repairs.

To check bulb operation, check whether
the parking brake and brake fluid warning
light illuminates when the ignition switch
is in the ON position.

Trunk lid open
warning (if equipped)

This warning light activates when the
trunk is not closed securely.

Door ajar warning

This warning light illuminates when a
door is not closed securely.

Low washer fluid level
warning indicator 
(if equipped)

This warning light indicates the washer
fluid reservoir is near empty. Refill the
washer fluid as soon as possible.

Low fuel level 
warning

This warning light indicates the fuel tank
is nearly empty. The warning light will
come on when the fuel level has dropped
to about 1.5~1.7 gallons (5.5~6.5 liters).
Refuel as soon as possible.

Headlight high beam
indicator 

This indicator illuminates when the head-
lights are on and in the high beam posi-
tion or when the turn signal lever is pulled
into the Flash-to-Pass position.

Air bag warning 
(if equipped) 

This warning light will blink or illuminate
for approximately 6 seconds each time
you turn the ignition switch to the ON
position.
If this indicator does not go out, or if it illu-
minates while the vehicle is being driven,
see an authorized Kia dealer for immedi-
ate service.

Check fuel filler cap 
warning 

This warning light indicates the fuel filler
cap is not tight securely.
Always make sure that the fuel filler cap
is tight.

WARNING

Driving the vehicle with a brake
warning light on is dangerous. If the
brake warning light remains on,
have the brakes checked and
repaired immediately by an author-
ized Kia dealer.

AIR

BAG

CHECK

FUEL

CAP

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

FABBRI PORTATUTTO 17405400 Assembly Instructions preview
17405400
Brand: FABBRI PORTATUTTO Pages: 2
Mazdaspeed QSEA 51 96Z Installation And User Instructions Manual preview
QSEA 51 96Z
Brand: Mazdaspeed Pages: 8
Actia TGU-R ACCESS User Manual preview
TGU-R ACCESS
Brand: Actia Pages: 37
Acura 2006 TSX Owner'S Manual preview
2006 TSX
Brand: Acura Pages: 2
Caltrend CV445 Installation Instructions preview
CV445
Brand: Caltrend Pages: 2
Audiovox EM-2201 Installation Instructions preview
EM-2201
Brand: Audiovox Pages: 1
EGR EGR-3PVE-COLOUR Installation Instructions Manual preview
EGR-3PVE-COLOUR
Brand: EGR Pages: 28
Parkeon StradaPAL Installation Manual preview
StradaPAL
Brand: Parkeon Pages: 43
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2
EUFAB 12014 Manual preview
12014
Brand: EUFAB Pages: 20
Volkswagen Zubehör 000 071 105 D Installation Instructions Manual preview
000 071 105 D
Brand: Volkswagen Zubehör Pages: 133
Ford 2006 F-250 Owner'S Manual preview
2006 F-250
Brand: Ford Pages: 312
Intellitronix BG6003 Installation Manual preview
BG6003
Brand: Intellitronix Pages: 11
TEINHOF P-038 Fitting And Operation Manual preview
P-038
Brand: TEINHOF Pages: 2
HAUL MASTER 96711 Setup Instructions preview
96711
Brand: HAUL MASTER Pages: 6
Perrycraft DynaSport Roof Rack Installation Instructions preview
DynaSport Roof Rack
Brand: Perrycraft Pages: 4
Toyota 2003 Prius Manual preview
2003 Prius
Brand: Toyota Pages: 307
Chevrolet 2005 Epica Owner'S Manual preview
2005 Epica
Brand: Chevrolet Pages: 340

Brands by name

Popular brands

Load more brands