manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Maintenance

38

7

BULB REPLACEMENT 

Use only the bulbs of the specified
wattage.

✽

✽

NOTICE

Be sure to replace the burned-out bulb
with one of the same wattage rating.
Otherwise, it may cause damage to the
fuse or electric wiring system.

✽

✽

NOTICE

If you don’t have necessary tools, the
correct bulbs and the expertise, consult
an authorized Kia dealer. In many cases,
it is difficult to replace vehicle light
bulbs because other parts of the vehicle
must be removed before you can get to
the bulb. This is especially true if you
have to remove the front bumper to get
to the bulb(s). 
Removing/installing the front bumper
or bumper hardware improperly can
result in damage to the vehicle.

✽

✽

NOTICE

After heavy, driving rain or washing,
headlight and taillight lenses could
appear frosty. This condition is caused by
the temperature difference between the
lamp inside and outside.  This is similar
to the condensation on your windows
inside your vehicle during the rain and
doesn’t indicate a problem with your
vehicle.  If the water leaks into the lamp
bulb circuitry, have the vehicle checked
by an authorized Kia dealer.

Headlight bulb replacement     

(1) Headlight (High/Low)
(2) Position light
(3) Front turn signal light
(4) Front fog light (if equipped)

WARNING

- Working on

the lights

Prior to working on the lights, firm-
ly apply the parking brake, ensure
that the ignition switch is turned to
the “LOCK” position and turn off
the lights to avoid sudden move-
ment of the vehicle and burning
your fingers or receiving an electric
shock.

1JBA7021

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Uniden BTSC1500 Owner'S Manual preview
BTSC1500
Brand: Uniden Pages: 16
Uniden BTSC1500 User Manual preview
BTSC1500
Brand: Uniden Pages: 20
Whispbar K925W Fitting Instructions Manual preview
K925W
Brand: Whispbar Pages: 15
Yuasa SmartShot Automatic 12V 1.5 Amp 5 Stage Technical Manual preview
SmartShot Automatic 12V 1.5 Amp 5 Stage
Brand: Yuasa Pages: 44
Connects2 adaptiv mini ADVM-BM1 Fitting & User Manual preview
adaptiv mini ADVM-BM1
Brand: Connects2 Pages: 4
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Lexus 2010 RX 350 Warranty And Services Manual preview
2010 RX 350
Brand: Lexus Pages: 82
IOGear GBHFK201W6 User Manual preview
GBHFK201W6
Brand: IOGear Pages: 38
Whispbar K723W Fitting Instructions Manual preview
K723W
Brand: Whispbar Pages: 77
Dodge 2004 JR41 Stratus Sedan Owner'S Manual preview
2004 JR41 Stratus Sedan
Brand: Dodge Pages: 273
Menabo 171071 Fitting Instructions preview
171071
Brand: Menabo Pages: 4
3mk Hyper Car Charger 30W User Manual preview
Hyper Car Charger 30W
Brand: 3mk Pages: 6
Saab 900 1983 Owner'S Manual preview
900 1983
Brand: Saab Pages: 64
LAS 10155 Manual preview
10155
Brand: LAS Pages: 4
LAS 11805 Manual preview
11805
Brand: LAS Pages: 24
FORM FIT HD 21K 08 Manual preview
HD 21K 08
Brand: FORM FIT Pages: 2
Crux SWRVL-54 Manual preview
SWRVL-54
Brand: Crux Pages: 2
Thule 1170 Instructions Manual preview
1170
Brand: Thule Pages: 8

Brands by name

Popular brands

Load more brands