manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

10 3

Index

Children

Restraint of Infants and Small··································· 3-35
Restraint of Larger ···················································· 3-36

Cigarette Lighter··························································· 3-76
Cleaner, Air··································································· 7-19
Cleaning

Interior Window Glass ·············································· 7-48
Lap/Shoulder Belt Webbing ······································ 7-48
Upholstery and Interior Trim ···································· 7-48

Climate Control Air Filter ············································ 7-20
Climate Control System·················································4-29
Clock, Digital································································ 3-79
Cluster, Instrument ······················································· 4-16
Compartment, Engine············································ 2-4, 7-11
Consumer Assistance ······················································ 9-1
Coolant Level, Checking the ········································ 7-13
Cooling System, Engine ··············································· 7-13
Cup Holder ··································································· 3-77

Day/Night Rearview Mirror ········································· 3-73
Defroster ········································································4-28
Digital Clock································································· 3-79
Dimensions (Specifications)··········································· 8-2
Disc Brake Wear Indicators ·········································· 4-10
Dome Light··································································· 3-74
Door

Ajar Warning ····························································· 4-22
Child Safety Lock, Rear············································ 3-10
Locks ··········································································· 3-7

Locks from Inside the Vehicle, Operating ·················· 3-8
Locks from Outside the Vehicle, Operating················ 3-7

Drive belts····································································· 7-16
Driving

At Night······································································· 5-7
Conditions, Hazardous ················································ 5-6
In Flooded Areas ························································· 5-9
In the Rain ··································································· 5-7
Tips ·············································································· 5-1
Winter ·········································································· 5-7
Your Vehicle ································································ 4-1

Economical Operation, Suggestions for ························· 5-5
Electrical

Circuit Protection ························································ 6-6
Equipment ··································································· 9-4
Power socket ····························································· 3-78
System (Specifications)··············································· 8-3

Emergency

In Case of an ······························································· 6-1
Roadside Assistance ···················································· 9-2
Starting ········································································ 6-3 

Emission Control System ··············································· 5-2
Engine 

Compartment·······················································2-4, 7-11
Cooling System ························································· 7-13
Exhaust Gas Precautions ············································· 5-2
Oil·············································································· 7-12
Oil Level, Checking the ············································ 7-12

E

D

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
Jacobsen Cushman Turf Truckster Parts & Maintenance Manual preview
Cushman Turf Truckster
Brand: Jacobsen Pages: 210
Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Whispbar K896W Fitting Instructions Manual preview
K896W
Brand: Whispbar Pages: 15
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
Whispbar K448W Fitting Instructions Manual preview
K448W
Brand: Whispbar Pages: 15
Renault 2016 Sandero Stepway Handbook preview
2016 Sandero Stepway
Brand: Renault Pages: 183
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
Nav TV NAV-INREN Quick Manual preview
NAV-INREN
Brand: Nav TV Pages: 2
Ranger design 1525-NS Installation Manual preview
1525-NS
Brand: Ranger design Pages: 22
National Cycle Quantum hardcoated N30216 Assembly Instructions And Owner'S Manual preview
Quantum hardcoated N30216
Brand: National Cycle Pages: 3
Ecco EC4210B-K Installation And Operation Instructions Manual preview
EC4210B-K
Brand: Ecco Pages: 9
Power Acoustik METER 4 Installation preview
METER 4
Brand: Power Acoustik Pages: 4
Thule RaceWay 991 Instructions Manual preview
RaceWay 991
Brand: Thule Pages: 12
Safe Fleet PRIME DESIGN VCR-TC11B Assembly Instructions Manual preview
PRIME DESIGN VCR-TC11B
Brand: Safe Fleet Pages: 12
Thule 1597 Instructions preview
1597
Brand: Thule Pages: 4
Prime Design URX-001-E Assembly Instructions Manual preview
URX-001-E
Brand: Prime Design Pages: 8

Brands by name

Popular brands

Load more brands