manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Knowing your vehicle

34

3

To unfasten the rear center belt 

1. Press the release button on the buckle

(D) and remove the tongue plate (C)
from the buckle (D).

2. To retract the rear center seatbelt,

insert the key or similar small rigid
device into the web release button (B)
on the anchor connector. Pull up on
the seat belt web (A) and allow the
webbing to retract automatically.
(4Door, if equipped)

WARNING

• When using the rear center belt,

you must lock all tongue plates
and buckles prior to use. If any
tongue plate or buckle is not
locked, it will increase the chance
of injury or death in the event of
collision.

• The rear center seatbelt tongue

plate (A) and anchor connector
(B) should remain locked at all
times.

They should only be

unlocked when folding the rear
seatback down or when carrying
an object in the rear seat that
could cause damage to the seat-
belt webbing or locking devices.
In either case, lock the tongue
plate (A) and anchor connector
(B) immediately after unfolding
the seatbacks or removing the
object being transported.

1JBA3050

1JBA3051A

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

kaarta STENCIL PRO Assembly & Use preview
STENCIL PRO
Brand: kaarta Pages: 29
Quadratec QR3 Installation Manual preview
QR3
Brand: Quadratec Pages: 8
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
Cadillac 2012 Escalade Hybrid Manual preview
2012 Escalade Hybrid
Brand: Cadillac Pages: 90
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Cadillac 2007 SRX Owner'S Manual preview
2007 SRX
Brand: Cadillac Pages: 522
H&S XRT Pro Installation & Operation Manual preview
XRT Pro
Brand: H&S Pages: 32
Cadillac 2004 Seville Customer Convenience/Personalization Manual preview
2004 Seville
Brand: Cadillac Pages: 20
Pyle PLRD146 User Manual preview
PLRD146
Brand: Pyle Pages: 8
RAM 1500 CLASSIC 2020 Owner'S Manual preview
1500 CLASSIC 2020
Brand: RAM Pages: 360
Magneti Marelli BCF636 Installation Instruction preview
BCF636
Brand: Magneti Marelli Pages: 2
CITROËN c4 picasso 2006 Owner'S Manual preview
c4 picasso 2006
Brand: CITROËN Pages: 266
Jackson Racing 999-200 Installation Instructions Manual preview
999-200
Brand: Jackson Racing Pages: 14
PowerMadd Tri-Mount 34269 Mounting Tips preview
Tri-Mount 34269
Brand: PowerMadd Pages: 2
Kia K900 2020 Vehicle Feature Tips preview
K900 2020
Brand: Kia Pages: 4
Prorack K138 Fitting Instructions Manual preview
K138
Brand: Prorack Pages: 14
Emerson Fisher 1052 Instruction Manual preview
Fisher 1052
Brand: Emerson Pages: 28
Genesis G90 Simple Manual preview
G90
Brand: Genesis Pages: 18

Brands by name

Popular brands

Load more brands