manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

6 15

In case of an emergency

3. Install the towing hook by turning it

clockwise into the hole until it is fully
secured (2).

4. Remove the towing hook and install

the cover after use.

Towing with a vehicle other than
a tow truck 

If towing is necessary, we recommend
you to have it done by an authorized Kia
dealer or a commercial tow truck service.

If towing service is not available in an
emergency, your vehicle may be tem-
porarily towed using a cable or chain
secured to the emergency towing hook
under the front or rear of the vehicle. Use
extreme caution when towing the vehicle.
A driver must be in the vehicle to steer it
and operate the brakes.

Towing in this manner may be done only
on hard-surfaced roads for a short dis-
tance and at low speeds. Also, the
wheels, axles, power train, steering and
brakes must all be in good condition.
• Do not use the tow hooks to pull a

vehicle out of mud, sand or other con-
ditions from which the vehicle cannot
be driven out under its own power.

• Avoid towing a vehicle heavier than the

vehicle doing the towing.

• The drivers of both vehicles should com-

municate with each other frequently.

✽

✽

NOTICE

• Attach a towing strap to the tow hook.
• Using a portion of the vehicle other

than the tow hooks for towing may
damage the body of your vehicle.  

• Use only a cable or chain specifically

intended for use in towing vehicles.
Securely fasten the cable or chain to
the towing hook provided.

1JBA6016

2

1JBA6016

• Front

1JBA6017

• Rear

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
Cadillac ESCALADE FAMILY - SPECIFICATIONS 2011 Specifications preview
ESCALADE FAMILY - SPECIFICATIONS 2011
Brand: Cadillac Pages: 1
BMW Wireless Charging Station Universal Instructions For Use Manual preview
Wireless Charging Station Universal
Brand: BMW Pages: 160
Saab 2008 9-5 Owner'S Manual preview
2008 9-5
Brand: Saab Pages: 288
Sunsky S-GPS-0142 User Manual preview
S-GPS-0142
Brand: Sunsky Pages: 9
TATA Motors 2013 Nano Owner'S Manual preview
2013 Nano
Brand: TATA Motors Pages: 136
Thule Kit 1429 Fitting Instructions Manual preview
Kit 1429
Brand: Thule Pages: 8
M7 SPEED AGS-R2 Manual preview
AGS-R2
Brand: M7 SPEED Pages: 6
Great Wall WEY VV5 Service Manual preview
WEY VV5
Brand: Great Wall Pages: 18
WIX WP9378 Installation Instruction preview
WP9378
Brand: WIX Pages: 2
RAM Promaster 2016 User Manual preview
Promaster 2016
Brand: RAM Pages: 148
Hamron 619-626 User Instructions preview
619-626
Brand: Hamron Pages: 36
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12
Edelbrock Performer-Plus 2172 Installation Instructions preview
Performer-Plus 2172
Brand: Edelbrock Pages: 4
Gentex ADVGEN20A Manual preview
ADVGEN20A
Brand: Gentex Pages: 2
Meritor 93000 Service Service Manual preview
93000 Service
Brand: Meritor Pages: 20
Stealthbox SB-J-GCHER2/10W3v2 Installation Manual preview
SB-J-GCHER2/10W3v2
Brand: Stealthbox Pages: 2
Yakima TopWater Quick Start Manual preview
TopWater
Brand: Yakima Pages: 9

Brands by name

Popular brands

Load more brands