manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

3 77

Knowing your vehicle

✽

✽

NOTICE

• Do not hold the lighter in after it is

already heated because it will over-
heat.

• Only a genuine Kia lighter should be

used in the cigarette lighter socket.
The use of plug-in accessories
(shavers, hand-held vacuums, and
coffee pots, for example) may damage
the socket or cause electrical failure.

• If the lighter does not pop out within

30 seconds, remove it to prevent over-
heating.  

Ashtrays 

To use the ashtray, open the cover.
To remove the ashtray to empty or clean
it, pull it up and out.

Cup holder

Cups or small beverage cans may be
placed in the cup holders.

1JBA3098

WARNING 

- Ashtray use

• Do not use the vehicle’s ashtrays

as waste receptacles.

• Putting lit cigarettes or matches in

an ashtray with other combustible
materials may cause a fire.

WARNING 

- Hot liquids

• Do not place uncovered cups of

hot liquid in the cup holder while
the vehicle is in motion. If the hot
liquid spills, you could be burned.
Such a burn to the driver could
cause a loss of control of the
vehicle.

• To reduce the risk of personal

injury in the event of sudden stop
or collision, do not place uncov-
ered or insecure bottles, glasses,
cans, etc., in the cup holder while
the vehicle is in motion.

1JBA3100

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Rightline Gear Car Top Duffle Bag Setup Manual preview
Car Top Duffle Bag
Brand: Rightline Gear Pages: 2
Streetwize LeisureWize EMOVE EM303A Manual preview
LeisureWize EMOVE EM303A
Brand: Streetwize Pages: 20
Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
Chevrolet 2014 TRAX Owner'S Manual preview
2014 TRAX
Brand: Chevrolet Pages: 412
Jeep Cherokee 1977 Owner'S Manual preview
Cherokee 1977
Brand: Jeep Pages: 136
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
NavInc CP-PEU-GV3 Manual preview
CP-PEU-GV3
Brand: NavInc Pages: 6
E&G Classics Denali 1094-0185-15 Instruction Manual preview
Denali 1094-0185-15
Brand: E&G Classics Pages: 3
Metra Electronics 99-7803G Wiring Instructions preview
99-7803G
Brand: Metra Electronics Pages: 2
TracRac TracVan Double Installation Instructions Manual preview
TracVan Double
Brand: TracRac Pages: 6
Rosco STSK4730 Installation & User Manual preview
STSK4730
Brand: Rosco Pages: 12
JAC HFC7151M1V-U221B Workshop Manual preview
HFC7151M1V-U221B
Brand: JAC Pages: 106
Directed Directechs FORD11 Installation Manual preview
Directechs FORD11
Brand: Directed Pages: 23
Raider ATV-21 Manual preview
ATV-21
Brand: Raider Pages: 2
Federal Signal Corporation CommCenter 300MB-SD Installation And Maintenance Manual preview
CommCenter 300MB-SD
Brand: Federal Signal Corporation Pages: 60
RAM PROMASTER 2021 Owner'S Manual preview
PROMASTER 2021
Brand: RAM Pages: 288

Brands by name

Popular brands

Load more brands