manualshive.com logo in svg

Kia Rio 2007, Manual

The Kia Rio 2007 is a compact and efficient vehicle that continues to impress with its stylish design and reliable performance. To get the most out of this vehicle, download the free user manual, offering detailed instructions and tips on maintenance and operation, exclusively at manualshive.com.

Share
Download
background image

Maintenance

22

7

WIPER BLADES 

Wiper blade maintenance  

Commercial hot waxes applied by
automatic car washes have been
known to make the windshield diffi-
cult to clean.

Contamination of either the windshield or
the wiper blades with foreign matter can
reduce the effectiveness of the wind-
shield wipers. Common sources of con-
tamination are insects, tree sap, and hot
wax treatments used by some commer-
cial car washes. If the blades are not wip-
ing properly, clean both the window and
the blades with a good cleaner or mild
detergent, and rinse thoroughly with
clean water.

✽

✽

NOTICE

To prevent damage to the wiper blades,
do not use gasoline, kerosene, paint
thinner, or other solvents on or near
them.  

Windshield wiper blade replace-
ment  

When the wipers no longer clean ade-
quately, the blades may be worn or
cracked, and require replacement.

✽

✽

NOTICE

To prevent damage to the wiper arms or
other components, do not attempt to
move the wipers manually.  

✽

✽

NOTICE

The use of a non-specified wiper blade
could result in wiper malfunction and
failure.

1. Raise the wiper arm and turn the wiper

blade assembly to expose the plastic
locking clip.

✽

✽

NOTICE

Do not allow the wiper arm to fall
against the windshield, since it may chip
or crack the windshield.

1LDA5023

Summary of Contents for Rio 2007

































































































































































































































































Reviews:

No comments

Related manuals for Rio 2007

Acdeos AXS FL Installation Instruction preview
AXS FL
Brand: Acdeos Pages: 7
Yakima LowRider Manual preview
LowRider
Brand: Yakima Pages: 15
Honda 2009 S2000 Owner'S Manual preview
2009 S2000
Brand: Honda Pages: 268
Webasto H300 comfort Operating Instructions Manual preview
H300 comfort
Brand: Webasto Pages: 44
Mazda MX-3 1995 Workshop Manual preview
MX-3 1995
Brand: Mazda Pages: 1001
MMD 41240 Quick Manual preview
41240
Brand: MMD Pages: 3
Buick 1995 Roadmaster Manual preview
1995 Roadmaster
Brand: Buick Pages: 340
Yakima SUPDawg Manual preview
SUPDawg
Brand: Yakima Pages: 10
Buick 1997 Park Avenue Manual preview
1997 Park Avenue
Brand: Buick Pages: 420
Kargo Master 4090L Instruction Manual preview
4090L
Brand: Kargo Master Pages: 10
Or-Fab 83228 Installation Instructions preview
83228
Brand: Or-Fab Pages: 5
NavLinkz RL4-MIB3-E Manual preview
RL4-MIB3-E
Brand: NavLinkz Pages: 24
Prorack K319 Fitting Instructions Manual preview
K319
Brand: Prorack Pages: 13
Car-Interface TV-Free CI-TF-C25 Manual preview
TV-Free CI-TF-C25
Brand: Car-Interface Pages: 5
Funkwerk EGO FLASH Operating Manual preview
EGO FLASH
Brand: Funkwerk Pages: 58
AKE PB-HC2 Quick Start Manual preview
PB-HC2
Brand: AKE Pages: 2
Metra Electronics GMRC-02 Installation Instructions preview
GMRC-02
Brand: Metra Electronics Pages: 2
VBG 56-239200 Mounting Instruction/Spare Parts List preview
56-239200
Brand: VBG Pages: 20

Brands by name

Popular brands

Load more brands